EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32021D1967

Commission Implementing Decision (EU) 2021/1967 of 11 November 2021 setting up a mandatory data repository and a mandatory digital information exchange mechanism in accordance with Directive 2002/49/EC of the European Parliament and of the Council (Text with EEA relevance)

C/2021/7948

OJ L 400, 12.11.2021, p. 160–195 (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force

ELI: http://data.europa.eu/eli/dec_impl/2021/1967/oj

12.11.2021   

EN

Official Journal of the European Union

L 400/160


COMMISSION IMPLEMENTING DECISION (EU) 2021/1967

of 11 November 2021

setting up a mandatory data repository and a mandatory digital information exchange mechanism in accordance with Directive 2002/49/EC of the European Parliament and of the Council

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2002/49/EC of the European Parliament and of the Council of 25 June 2002 relating the assessment and management of environmental noise (1), and in particular Article 10(2) and point (3) of Annex VI thereof,

Whereas:

(1)

After the modifications introduced into Directive 2002/49/EC by the Regulation 2019/1010 of the European Parliament and of the Council (2) a mandatory data repository and a mandatory digital information exchange mechanism needs to be developed by the Commission for Member States to be able to share information on strategic noise maps and summaries of noise action plans.

(2)

An electronic noise data reporting mechanism was developed in 2007 to fulfil the reporting requirements of the Directive 2002/49/EC, namely the European Environment Agency’s infrastructure for supporting and improving data and information flows (‘Reportnet’). Reportnet has been updated and refined by the Commission, assisted by the European Environment Agency, in cooperation with the Member States. It should be part of the European Spatial Data Infrastructure that will enable the sharing of environmental spatial information among public sector organisations, facilitate public access to spatial information across Europe and assist in policy-making across boundaries. It applies to all spatial data under the scope of Directive 2007/2/EC of the European Parliament and of the Council (3), that sets requirements for reporting and data-sharing between public authorities by means of an appropriate infrastructure. Reportnet has therefore been further developed to fulfil such requirements as well.

(3)

A digital information exchange mechanism needs a common language so that data can be managed and interpreted by the data repository. Accordingly, the data that is transferred to or linked with the data repository should fulfil very specific requirements regarding its format. Therefore, as an integral part of the development of the digital information exchange mechanism, the annex to this Decision specifies the format for the data to be communicated to the Commission through the mandatory data repository as referred to in Article 10(2) of Directive 2002/49/EC.

(4)

The introduction of the new mandatory digital information exchange mechanism requires the competent authorities of the Member States to align their data and infrastructure to the new technical requirements. It is therefore necessary to allow Member States some time for such technical alignment. Consequently, the application of this Decision should be deferred to 1 January 2022.

(5)

The measures provided for in this Decision are in accordance with the opinion of the Committee, established by Article 13(2) of Directive 2002/49/EC,

HAS ADOPTED THIS DECISION:

Article 1

Member States shall use the European Environment Agency’s e-Reporting platform for reporting environmental and climate data (‘Reportnet’) as mandatory data repository for the submission of the information referred to in Directive 2002/49/EC and according to the Annex to this Decision.

Article 2

The Reportnet shall be used as the mandatory digital information exchange mechanism referred to in Directive 2002/49/EC.

Article 3

This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2022.

Done at Brussels, 11 November 2021.

For the Commission

The President

Ursula VON DER LEYEN


(1)   OJ L 189, 18.7.2002, p. 12.

(2)  Regulation (EU) 2019/1010 of the European Parliament and of the Council of 5 June 2019 on the alignment of reporting obligations in the field of legislation related to the environment, and amending Regulations (EC) No 166/2006 and (EU) No 995/2010 of the European Parliament and of the Council, Directives 2002/49/EC, 2004/35/EC, 2007/2/EC, 2009/147/EC and 2010/63/EU of the European Parliament and of the Council, Council Regulations (EC) No 338/97 and (EC) No 2173/2005, and Council Directive 86/278/EEC (OJ L 170, 25.6.2019, p. 115).

(3)  Directive 2007/2/EC of the European Parliament and of the Council of 14 March 2007 establishing an Infrastructure for Spatial Information in the European Community (INSPIRE) (OJ L 108, 25.4.2007, p. 1).


ANNEX

Section 1

Reporting of agglomerations, major airports, major railways and major roads

1.1.   Agglomerations

Data to be reported

Content

Mandatory or optional nature of the reporting

1.1.1.

Agglomeration identifier

Unique identifier assigned to each agglomeration.

Mandatory.

1.1.2.

Agglomeration name

Name of agglomeration.

Mandatory.

1.1.3.

Size

Area of coverage of the agglomeration.

Mandatory.

1.1.4.

Number of inhabitants

Number of inhabitants living inside the boundary of the agglomeration.

Mandatory.

1.1.5.

Existing noise sources in agglomeration

Name of the existing type of noise sources inside the agglomeration.

Mandatory.

1.1.6.

inspireId

External object identifier of the spatial object (agglomeration).

Mandatory.

1.1.7.

Geometry

Spatial extent of the agglomeration.

Mandatory.

1.1.8.

Additional information as required by Commission Regulation (EU) No 1089/2010 (1)

Additional attributes such as Zone type, Specialized zone type, Environmental domain, Legal basis, Designation period, Competent authority, Life cycle information.

Mandatory.

1.2.   Major airports

Data to be reported

Content

Mandatory or optional nature of the reporting

1.2.1.

Airport Name

Official name of the major airport.

Mandatory.

1.2.2.

ICAO code

Unique international code of airport defined by the International Civil Aviation Organization.

Mandatory.

1.2.3.

Annual traffic flow

Number of take offs and landings per year at the major airport, excluding those purely for training purposes on light aircraft.

Mandatory.

1.2.4.

Geometry

Geometry representing the location of the major airport. Point geometry.

Mandatory.

1.2.5.

Link to reference dataset

Information about the dataset of the airport that follows the requirements of Directive 2007/2/EC to which the major airport could be linked.

Optional.

1.2.6.

Link to reference object

Reference to the airport (spatial object) in the reference dataset of the airport that is provided in the link to the reference dataset.

Optional.

1.3.   Major railways

Data to be reported

Content

Mandatory or optional nature of the reporting

1.3.1.

Rail identifier

Unique identifier assigned to each major railway segment.

Mandatory.

1.3.2.

Rail national code

Railway code (railway identification number) used within the Member State.

Optional.

1.3.3.

Rail name

Railway name used within the Member State.

Optional.

1.3.4.

Annual traffic flow

Number of train passages per year.

Mandatory.

1.3.5.

Length

Length of the major railway segment, in metres.

Mandatory.

1.3.6.

Link to reference dataset

Information about the dataset of the railway network that follows the requirements of Directive 2007/2/EC to which the major railway could be linked.

Optional.

1.3.7.

Link to reference object

Reference to the railway (spatial object) in the reference dataset of the railway network that is provided in the link to the reference dataset.

Optional.

1.3.8.

inspireId

External object identifier of the spatial object (major railway).

Mandatory.

1.3.9.

Geometry

Geometry of the major railway.

Mandatory.

1.3.10.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as ‘fictitious’, network information, validity information and life cycle information.

Mandatory.

1.4.   Major roads

Data to be reported

Content

Mandatory or optional nature of the reporting

1.4.1.

Road identifier

Unique identifier assigned to each major road segment.

Mandatory.

1.4.2.

Road national code

Road code used within the Member State.

Optional.

1.4.3.

Road name

Official road name used within the Member State.

Optional.

1.4.4.

EU road code

European road code used to reference the road.

Optional.

1.4.5.

Annual traffic flow

Number of vehicle passages per year on the major road segment.

Mandatory.

1.4.6.

Length

Actual length of the major road segment, in metres.

Mandatory.

1.4.7.

Link to reference dataset

Information about the dataset of road network that follows the requirements of Directive 2007/2/EC to which the major road could be linked.

Optional.

1.4.8.

Link to reference object

Reference to the road (spatial object) in the reference dataset of road network that is provided in the link to the reference dataset.

Optional.

1.4.9.

inspireId

External object identifier of the spatial object (major road).

Mandatory.

1.4.10.

Geometry

Geometry of major road.

Mandatory.

1.4.11.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as ‘fictitious’, network information, validity information and life cycle information.

Mandatory.

Section 2

Designated competent authorities and bodies responsible for implementing Directive 2002/49/EC

2.1.   Competent authority general information

Data to be reported

Content

Mandatory or optional nature of the reporting

2.1.1.

Competent authority details

Name and address of a competent authority responsible for implementing Directive 2002/49/EC, including its unique identifier.

Mandatory.

2.2.   Competent authority and responsibilities related to noise in agglomerations, reported for each agglomeration.

Data to be reported

Content

Mandatory or optional nature of the reporting

2.2.1.

Competent authority identifier

Unique identifier of the competent authority.

Mandatory.

2.2.2.

Agglomeration identifier

Unique identifier assigned to each agglomeration.

Mandatory.

2.2.3.

Competent authority for noise source

Noise source in the agglomeration for which the competent authority is responsible.

Mandatory.

2.2.4.

Competent authority role

Role of the competent authority with regard to the agglomeration.

Mandatory.

2.3.   Competent authority and responsibilities related to noise from major airports.

Data to be reported

Content

Mandatory or optional nature of the reporting

2.3.1.

Competent authority identifier

Unique identifier of the competent authority.

Mandatory.

2.3.2.

ICAO code

Unique international code of airport defined by the International Civil Aviation Organization.

Mandatory.

2.3.3.

Competent authority role

Role of the competent authority with regard to the major airport.

Mandatory.

2.4.   Competent authority and responsibilities related to noise from major railways.

Data to be reported

Content

Mandatory or optional nature of the reporting

2.4.1.

Competent authority identifier

Unique identifier of the competent authority.

Mandatory.

2.4.2.

Competent authority role

Role of the competent authority with regard to the major railway.

Mandatory.

2.4.3.

Reporting level

Reporting level in which the competent authority is responsible for major railways.

Mandatory.

2.4.4.

Territorial unit code

Unique code corresponding to the common classification of territorial units for statistics that follows Regulation (EC) 1059/2003 of the European Parliament and of the Council (2).

Mandatory if the reporting level is at any sub-national level.

2.4.5.

Rail identifier

Unique identifier assigned to each major railway segment.

Mandatory if the reporting level is a major railway segment.

Optional if reporting level is country or any other sub-national level.

2.5.   Competent authority and responsibilities related to noise from major roads.

Data to be reported

Content

Mandatory or optional nature of the reporting

2.5.1.

Competent authority identifier

Unique identifier of the competent authority.

Mandatory.

2.5.2.

Competent authority role

Role of the competent authority with regard to the major road.

Mandatory.

2.5.3.

Reporting level

Reporting level in which the competent authority is responsible for major roads.

Mandatory.

2.5.4.

Territorial unit code

Unique code corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory if the reporting level is at any sub-national level

2.5.5.

Road identifier

Unique identifier assigned to each major road segment.

Mandatory if the reporting level is a major road segment.

Optional if reporting level is country or any other sub-national level.

2.6.   Competent authority for delimiting quiet areas - inside agglomerations or in open country.

Note: for the information under 2.6. , if no quiet area is delimited, no information shall be reported.

Data to be reported

Content

Mandatory or optional nature of the reporting

2.6.1.

Competent authority identifier

Unique identifier of the competent authority.

Mandatory.

2.6.2.

Competent authority for quiet area

A quiet area type for which the competent authority is responsible.

Mandatory.

2.6.3.

Quiet area identifier

Unique identifier of the quiet area.

Mandatory.

2.7.   Territorial units for statistics reference information (3)

Data to be reported

Content

Mandatory or optional nature of the reporting

2.7.1.

Title (NUTS)

Title of the reference dataset of territorial units for statistics (NUTS).

Mandatory if the reporting level of the competent authority for major roads/railways applies to any territorial units for statistics (NUTS).

2.7.2.

Link (NUTS)

Link to the reference dataset of territorial units for statistics (NUTS).

Optional.

2.7.3.

Title (LAU)

Title of the reference dataset of Local Administrative Units (LAU).

Mandatory if the reporting level of the competent authority for major roads/railways applies to any Local Administrative Units (LAU).

2.7.4.

Link (LAU)

Link to the reference dataset of Local Administrative Units (LAU).

Optional.

Section 3

Noise limit values

3.1.   Noise limit report

Data to be reported

Content

Mandatory or optional nature of the reporting

3.1.1.

Report identifier

Identifier of the noise limit values’ report.

Mandatory.

3.1.2.

Noise limit report

Noise limit report details.

Mandatory.

3.2.   Noise limit values reported in noise limit report

Data to be reported

Content

Mandatory or optional nature of the reporting

3.2.1.

Noise source

Noise source for which the noise limit is applicable.

Mandatory.

3.2.2.

Limit value defined

Declaration on whether or not a limit value exists.

Mandatory.

3.2.3.

Data to be reported for limit values in force or in preparation.

3.2.3.1.

Status

Status of the limit value: in force or in preparation.

Mandatory.

3.2.3.2.

Area type

Destination of use of the area where the noise limit is applied.

Mandatory for residential area types where limits are in force or are under preparation.

Optional for hospitals, schools and other areas.

3.2.3.3.

Noise indicator

Noise indicator of the limit value.

Mandatory for Lden and Lnight.

Optional for all other indicators.

3.2.3.4.

Limit value

Noise level value in dB.

Mandatory if the noise limit is in force or in preparation.

3.2.3.5.

Explanation

Further information on the noise limit values.

Optional.

Section 4

Strategic noise mapping

4.1.   Strategic noise mapping – noise contours

Note: Noise contour maps are mandatory for major roads, railways and air traffic inside and outside agglomerations. As long as noise contour maps for roads, railways, air traffic and industries inside agglomeration exist those shall also be reported together with the information below.

Data to be reported

Content

Mandatory or optional nature of the reporting.

4.1.1.

Source

Noise source shown in the noise contour map.

Mandatory for major roads, major railways and major airports inside and outside agglomerations.

Mandatory for roads, railways, air traffic and industries inside agglomeration if applicable.

4.1.2.

Category of noise indicators and values in noise contour map.

4.1.2.1.

Category for major source

Identifies the different indicator values or range values of the noise contour map.

Mandatory for major roads, major railways and major airports inside and outside agglomerations. Mandatory are the 55 and 65 dB Lden contours. Other noise values or noise indicators are optional.

4.1.2.2.

Category for agglomeration

Identifies the different indicator values or range values of the noise contour map.

Mandatory for roads, railways, airports and industries inside agglomeration if available. Mandatory are the 60, 65, 70, 75 dB Lden contours. Other noise values or noise indicators are optional.

4.1.3.

Measure time

Calendar year for which the noise contour map has been calculated.

Mandatory.

4.1.4.

Geometry

Geometry (location) of the noise contour maps.

Mandatory.

4.1.5.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as environmental health determinant type, validity information and life cycle information.

Mandatory.

4.2.   Noise exposure data for agglomerations

Exposure data may be reported for a complete agglomeration or for Local Administrative Units2 covering agglomeration.

Data to be reported

Content

Mandatory or optional nature of the reporting

4.2.1.

Agglomeration identifier

Unique identifier assigned to each agglomeration.

Mandatory.

4.2.2.

Noise source

Noise source of the exposed population values inside agglomeration.

Mandatory for each individual existing noise source in agglomeration.

Optional for all sources in agglomeration combined.

4.2.3.

Exposure values in an agglomeration specify all information on population exposure to be reported inside agglomerations according to the selected noise source.

4.2.3.1.

Exposure type

Defines the characteristics of the dwellings' façade where noise exposure has been calculated.

Mandatory for most exposed façade.

Optional for other exposure types.

4.2.3.2.

Noise level

Defines the dB range value for Lden or Lnight at which the number of people exposed has been calculated.

Mandatory values are:

Lden: 55-59, 60-64, 65-69, 70-74, greater than 75 dB, and Lnight: 50-54, 55-59, 60-64, 65-69, greater than 70 dB.

Optional for other noise levels.

4.2.3.3.

Exposed people

Number of people exposed to noise according to the selected Noise source, Exposure type and Noise level.

Mandatory.

4.2.3.4.

Exposed hospitals

Number of hospitals exposed to noise according to the selected Noise source, Exposure type and Noise level.

Optional.

4.2.3.5.

Exposed schools

Number of schools exposed to noise according to the selected Noise source, Exposure type and Noise level.

Optional.

4.2.3.6.

Local administrative unit

Unique code corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory if exposure values in agglomeration are reported per Local Administrative Unit (LAU).

4.2.3.7.

ICAO code

Unique international code of airport defined by the International Civil Aviation Organization.

Mandatory if exposure data is reported for a specific major airport inside agglomeration.

4.2.3.8.

Description of all sources

Description of the noise sources considered for calculating exposure data.

Mandatory if exposure data is reported for all sources in agglomeration combined.

4.2.4.

Computation and measurement method

Computation and measurement method being used to calculate the noise maps.

Mandatory.

4.2.5.

Coverage criteria

Information on criteria used to select the roads and railways that are mapped in agglomerations.

Optional.

4.2.6.

Exposure to noise calculation method

Information on the methods employed to calculate exposure to noise at the most exposed façade as described in Section 2.8 of Annex II to Directive 2002/49/EC.

Optional.

4.2.7.

Reference link

Link to the published online information.

Optional.

4.3.   Noise exposure data for major airports

Exposure data may be reported per major airport or per Local Administrative Units2 affected by the noise from major airport.

Data to be reported

Content

Mandatory or optional nature of the reporting

4.3.1.

ICAO code

Unique international code of airport defined by the International Civil Aviation Organization.

Mandatory.

4.3.2.

Territorial unit code

Unique code corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory if exposure values related to major airports are reported per Local Administrative Unit (LAU).

4.3.3.

Information on population exposure for major airports outside agglomerations

4.3.3.1.

Exposure type

Defines the characteristics of the dwellings' façade where noise exposure is calculated.

Mandatory for most exposed façade outside agglomeration.

Optional for other exposure types.

4.3.3.2.

Noise level

Defines the dB range value for Lden or Lnight at which the number of people exposed is calculated.

Mandatory for most exposed façade

Lden: 55-59, 60-64, 65-69, 70-74, greater than 75 dB, and Lnight: 50-54, 55-59, 60-64, 65-69, greater than 70 dB.

Optional for other noise levels and/or exposure types.

4.3.3.3.

Exposed people

Number of people exposed to noise according to the selected Exposure type and Noise level.

Mandatory.

4.3.3.4.

Exposed area

Area exposed (in km2) to the selected Exposure type and Noise level.

Optional.

4.3.3.5.

Exposed dwellings

Number of dwellings exposed to noise according to Exposure type and Noise level.

Optional.

4.3.3.6.

Exposed hospitals

Number of hospitals exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.3.3.7.

Exposed schools

Number of schools exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.3.4.

Information on population exposure for major airports including agglomerations

4.3.4.1.

Exposure type

Defines the characteristics of the dwellings' façade where noise exposure is calculated.

Mandatory for most exposed façade including agglomerations.

4.3.4.2.

Noise level

Defines the dB range value for Lden at which the number of people exposed is calculated.

Mandatory for

Lden: higher than 55, 65 and 75 dB respectively.

Optional for other noise levels.

4.3.4.3.

Exposed people

Number of people exposed to noise according to the selected Exposure type and Noise level.

Mandatory.

4.3.4.4.

Exposed area

Area exposed (in km2) to the selected Exposure type and Noise level.

Mandatory.

4.3.4.5.

Exposed dwellings

Number of dwellings exposed to noise according to Exposure type and Noise level.

Mandatory

4.3.4.6.

Exposed hospitals

Number of hospitals exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.3.4.7.

Exposed schools

Number of schools exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.3.5.

Computation and measurement method

Computation and measurement method being used to calculate the noise maps.

Mandatory.

4.3.6.

Exposure to noise calculation method

Information on the methods employed to calculate exposure to noise at the most exposed façade as described in Section 2.8 of Annex II to Directive 2002/49/EC.

Optional.

4.3.7.

Reference link

Link to the published online information.

Optional.

4.4.   Noise exposure data for major railways

Exposure data may be reported per territorial units for statistics or Local Administrative Units2 affected by the noise from major railways.

Data to be reported

Content

Mandatory or optional nature of the reporting

4.4.1.

Reporting level

Type of aggregation level for the data being reported, including national or sub-national level, or for all the railways in the country related to the exposure for major railways.

Mandatory.

4.4.2.

Territorial unit code

Unique code corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory.

4.4.3.

Rail identifier

Unique code corresponding to one or more railways comprised within the territorial unit code.

Optional.

4.4.4.

Information on population exposure for major railways outside agglomerations

4.4.4.1.

Exposure type

Defines the characteristics of the dwellings' façade where noise exposure is calculated.

Mandatory for most exposed façade outside agglomeration.

Optional for other exposure types.

4.4.4.2.

Noise level

Defines the dB range value for Lden or Lnight at which the number of people exposed is calculated.

Mandatory for most exposed façade

Lden: 55-59, 60-64, 65-69, 70-74, greater than 75 dB, and Lnight: 50-54, 55-59, 60-64, 65-69, greater than 70 dB.

Optional for other noise levels and/or exposure types.

4.4.4.3.

Exposed people

Number of people exposed to noise according to the selected Exposure type and Noise level.

Mandatory.

4.4.4.4.

Exposed area

Area exposed (in km2) to the selected Exposure type and Noise level.

Optional.

4.4.4.5.

Exposed dwellings

Number of dwellings exposed to noise according to Exposure type and Noise level.

Optional.

4.4.4.6.

Exposed hospitals

Number of hospitals exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.4.4.7.

Exposed schools

Number of schools exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.4.5.

Information on population exposure for major railways including agglomerations

4.4.5.1.

Exposure type

Defines the characteristics of the dwellings' façade where noise exposure is calculated.

Mandatory for most exposed façade including agglomerations.

4.4.5.2.

Noise level

Defines the dB range value for Lden at which the number of people exposed is calculated.

Mandatory for

Lden: higher than 55, 65 and 75 dB respectively.

Optional for other noise levels.

4.4.5.3.

Exposed people

Number of people exposed to noise according to the selected Exposure type and Noise level.

Mandatory.

4.4.5.4.

Exposed area

Area exposed (in km2) to the selected Exposure type and Noise level.

Mandatory.

4.4.5.5.

Exposed dwellings

Number of dwellings exposed to noise according to Exposure type and Noise level.

Mandatory.

4.4.5.6.

Exposed hospitals

Number of hospitals exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.4.5.7.

Exposed schools

Number of schools exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.4.6.

Computation and measurement method

Computation and measurement method being used to calculate the noise maps.

Mandatory.

4.4.7.

Exposure to noise calculation method

Information on the methods employed to calculate exposure to noise at the most exposed façade as described in Section 2.8 of Annex II to Directive 2002/49/EC.

Optional.

4.4.8.

Reference link

Link to the published online information.

Optional.

4.5.   Noise exposure data for major roads

Exposure data may be reported per territorial units for statistics or Local Administrative Units2 affected by the noise from major roads.

Data to be reported

Content

Mandatory or optional nature of the reporting

4.5.1.

Reporting level

Type of aggregation level for the data being reported, including national or sub-national level, or for all the roads in the country related to the exposure for major roads.

Mandatory.

4.5.2.

Territorial unit code

Unique code corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory.

4.5.3.

Road identifier

Unique code corresponding to one or more roads comprised within the territorial unit code.

Optional.

4.5.4.

Information on population exposure for major roads outside agglomerations.

4.5.4.1.

Exposure type

Defines the characteristics of the dwellings' façade where noise exposure is calculated.

Mandatory for most exposed façade outside agglomeration.

Optional for other exposure types.

4.5.4.2.

Noise level

Defines the dB range value for Lden or Lnight at which the number of people exposed is calculated.

Mandatory for most exposed façade

Lden: 55-59, 60-64, 65-69, 70-74, greater than 75 dB, and Lnight: 50-54, 55-59, 60-64, 65-69, greater than 70 dB.

Optional for other noise levels and/or exposure types.

4.5.4.3.

Exposed people

Number of people exposed to noise according to the selected Exposure type and Noise level.

Mandatory.

4.5.4.4.

Exposed area

Area exposed (in km2) to the selected Exposure type and Noise level.

Optional.

4.5.4.5.

Exposed dwellings

Number of dwellings exposed to noise according to Exposure type and Noise level.

Optional.

4.5.4.6.

Exposed hospitals

Number of hospitals exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.5.4.7.

Exposed schools

Number of schools exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.5.5

Information on population exposure for major roads including agglomerations.

4.5.5.1.

Exposure type

Defines the characteristics of the dwellings' façade where noise exposure is calculated.

Mandatory for most exposed façade including agglomerations.

4.5.5.2.

Noise level

Defines the dB range value for Lden at which the number of people exposed is calculated.

Mandatory for

Lden: higher than 55, 65 and 75 dB respectively.

Optional for other noise levels.

4.5.5.3.

Exposed people

Number of people exposed to noise according to the selected Exposure type and Noise level.

Mandatory.

4.5.5.4.

Exposed area

Area exposed (in km2) to the selected Exposure type and Noise level.

Mandatory.

4.5.5.5.

Exposed dwellings

Number of dwellings exposed to noise according to Exposure type and Noise level.

Mandatory.

4.5.5.6.

Exposed hospitals

Number of hospitals exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.5.5.7.

Exposed schools

Number of schools exposed to noise according to the selected Exposure type and Noise level.

Optional.

4.5.6.

Computation and measurement method

Computation and measurement method being used to calculate the noise maps.

Mandatory.

4.5.7.

Exposure to noise calculation method

Information on the methods employed to calculate exposure to noise at the most exposed façade as described in Section 2.8 of Annex II to Directive 2002/49/EC.

Optional.

4.5.8.

Reference link

Link to the published online information.

Optional.

4.6.   Territorial units for statistics reference information2

Data to be reported

Content

Mandatory or optional nature of the reporting

4.6.1.

Title (NUTS)

Title of the reference dataset of territorial units for statistics (NUTS).

Mandatory if noise exposure data are prepared on the level of territorial units NUTS.

4.6.2.

Link (NUTS)

Link to the reference dataset of territorial units for statistics (NUTS).

Optional.

4.6.3.

Title (LAU)

Title of the reference dataset of Local Administrative Units (LAU).

Mandatory if noise exposure data are prepared on the level of Local Administrative Units (LAU).

4.6.4.

Link (LAU)

Link to the reference dataset of Local Administrative Units (LAU).

Optional.

Section 5

Noise-control programmes

5.1.   Noise-control programmes that have been carried out in the past and noise-measures in place in agglomerations

Note: for the information under 5.1., if there was no noise-control programme in the past, no information shall be reported

Data to be reported

Content

Mandatory or optional nature of the reporting

5.1.1.

Agglomeration identifier

Unique identifier assigned to each agglomeration.

Mandatory.

5.1.2.

Noise-control programme identifier

Unique identifier assigned to each noise-control programme.

Mandatory.

5.1.3.

Noise-control programme information

Details of the noise-control programme.

Mandatory.

5.1.4.

Explanation

Further explanation besides the information contained in the noise-control programme report.

Optional.

5.1.5.

Noise-control programme level

Type of aggregation level at which the noise-control programme is established such as national or sub-national level, or for all the agglomeration.

Mandatory.

5.1.6.

Information on territorial unit of the noise-control programme (NUTS or LAU)

5.1.6.1.

Territorial unit code

Unique code (NUTS or LAU) corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory.

5.1.6.2.

Territorial unit dataset information

Title and version of the territorial units for statistics dataset that follows Regulation (EC) No 1059/2003 (NUTS or LAU).

Mandatory.

5.1.6.3.

Reference link

Link to Eurostat data set used for the noise data reporting.

Optional.

5.2.   Noise-control programmes that have been carried out in the past and noise-measures in place in major airports

Note: for the information under 5.2., if there was no noise-control programme in the past, no information shall be reported

Data to be reported

Content

Mandatory or optional nature of the reporting

5.2.1.

ICAO code

Unique international code of airport defined by the International Civil Aviation Organization.

Mandatory.

5.2.2.

Noise-control programme identifier

Unique identifier assigned to each noise-control programme.

Mandatory.

5.2.3.

Noise-control programme information

Details of the noise-control programme.

Mandatory.

5.2.4.

Explanation

Further explanation besides the information contained in the noise-control programme report.

Optional.

5.2.5.

Noise-control programme level

Type of aggregation level at which the noise-control programme is established, such as national or sub-national level, or for all the airports in the country.

Mandatory.

5.2.6.

Information on territorial unit of the noise-control programme (NUTS or LAU)

5.2.6.1.

Territorial unit code

Unique code (NUTS or LAU) corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory.

5.2.6.2.

Territorial unit dataset information

Title and version of the territorial units for statistics dataset that follows Regulation (EC) No 1059/2003 (NUTS or LAU).

Mandatory.

5.2.6.3.

Reference link

Link to Eurostat data set used for the noise data reporting.

Optional.

5.3.   Noise-control programmes that have been carried out in the past and noise-measures in place in major railways

Note: for the information under 5.3., if there was no noise-control programme in the past, no information shall be reported

Data to be reported

Content

Mandatory or optional nature of the reporting

5.3.1.

Rail identifier

Unique identifier assigned to each major railway segment.

Mandatory if the reporting level is a major railway segment.

Optional if reporting level is country or any other sub-national level.

5.3.2.

Noise-control programme identifier

Unique identifier assigned to each noise-control programme.

Mandatory.

5.3.3.

Noise-control programme information

Details of the noise-control programme.

Mandatory.

5.3.4.

Explanation

Further explanation besides the information contained in the noise-control programme report.

Optional.

5.3.5.

Noise-control programme level

Type of aggregation level at which the noise-control programme is established, such as national or sub-national level, or for all the major railways in the country.

Mandatory.

5.3.6.

Information on territorial unit of the noise-control programme (NUTS or LAU)

5.3.6.1.

Territorial unit code

Unique code (NUTS or LAU) corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory.

5.3.6.2.

Territorial unit dataset information

Title and version of the territorial units for statistics dataset that follows Regulation (EC) No 1059/2003 (NUTS or LAU).

Mandatory.

5.3.6.3.

Reference link

Link to Eurostat data set used for the noise data reporting.

Optional.

5.4.   Noise-control programmes that have been carried out in the past and noise-measures in place in major roads

Note: for the information under 5.4., if there was no noise-control programme in the past, no information shall be reported

Data to be reported

Content

Mandatory or optional nature of the reporting

5.4.1.

Road identifier

Unique identifier assigned to each major road segment.

Mandatory if the reporting level is a major road segment.

Optional if reporting level is country or any other sub-national level.

5.4.2.

Noise-control programme identifier

Unique identifier assigned to each noise-control programme.

Mandatory.

5.4.3.

Noise-control programme information

Details of the noise-control programme.

Mandatory.

5.4.4.

Explanation

Further explanation besides the information contained in the noise-control programme report.

Optional.

5.4.5.

Noise-control programme level

Level at which the noise-control programme is established, such as national or sub-national level, or for all the major roads in the country.

Mandatory.

5.4.6.

Information on territorial unit of the noise-control programme (NUTS or LAU)

5.4.6.1.

Territorial unit code

Unique code (NUTS or LAU) corresponding to the common classification of territorial units for statistics that follows Regulation (EC) No 1059/2003.

Mandatory.

5.4.6.2.

Territorial unit dataset information

Title and version of the territorial units for statistics dataset that follows Regulation (EC) No 1059/2003 (NUTS or LAU).

Mandatory.

5.4.6.3.

Reference link

Link to Eurostat data set used for the noise data reporting.

Optional.

Section 6

Noise action plans

6.1.   Noise action plan for agglomeration

Data to be reported

Content

Mandatory or optional nature of the reporting

6.1.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.1.2.

Agglomeration identifier

The unique identifiers of the agglomerations covered in the noise action plan.

Mandatory.

6.1.3.

Identifier of competent authority

Unique identifier of the competent authority responsible for action plan development, collection or approval.

Mandatory.

6.1.4.

Legal context information of the noise action plan.

6.1.4.1.

Noise action plan start date

Date when the noise action plan is adopted.

Mandatory.

6.1.4.2.

Noise action plan end (implementation) date

Date when the noise action plan is expected to be implemented.

Optional.

6.1.4.3.

Action plan document

Details of the document containing the action plan.

Optional.

6.1.4.4.

Additional description

Additional information about the legal framework of the noise action plan.

Optional.

6.1.5.

Limit values

Information on noise limit values in place considered for the evaluation and implementation of noise management and reduction actions. One of the two options shall be provided:

link to the existing noise limit report,

or

information on other noise limit values used as criteria for the evaluation and implementation of noise management and reduction actions within the area covered by the action plan.

Mandatory.

6.1.6.

Information on public consultation of the proposed noise action plan.

6.1.6.1.

Public consultation documentation summary

Summary of the public consultation documentation.

Optional.

6.1.6.2.

Public consultation period

Start and end date of the public consultation period.

Mandatory.

6.1.6.3.

Public consultation means

Means used to consult the public and reach different stakeholders.

Mandatory.

6.1.6.4.

Type of stakeholders

Type of stakeholders participating in the public consultation.

Optional.

6.1.6.5.

Number of participants

Number of people that participated in the public consultation.

Optional.

6.1.6.6.

Received comments

Explanation of whether or not any comments were received during the public consultation process.

Mandatory.

6.1.6.7.

Revision of noise action plan

Explanation of how a revision of the noise action plan has been conducted and how comments were taken into account after the public consultation process.

Mandatory.

6.1.7.

Noise mapping results include summary of information from the strategic noise maps within the area covered by the noise action plans, including the estimated number of people exposed to noise and the identification of problems and situations that need to be improved.

6.1.7.1.

Agglomeration identifier

Unique identifier assigned to an agglomeration that is included in the noise action plan.

Optional.

6.1.7.2.

Noise source

Noise sources inside the agglomeration addressed by the noise action plan.

Mandatory.

6.1.7.3.

Exposed Lden 55

Number of people exposed to equal or more than 55 dB Lden in the area covered by the noise action plan.

Mandatory.

6.1.7.4.

Exposed Lnight 50

Number of people exposed to equal or more than 50 dB Lnight in the area covered by the noise action plan.

Mandatory.

6.1.7.5.

Exposed to other indicator

Number of people exposed to another noise indicator than Lden and Lnight relevant for the noise action plan.

Optional.

6.1.7.6.

Situation for improvement

A description of the noise problems identified and situations that need to be improved.

Mandatory.

Optional to describe prioritization criteria used for developing the noise action plan.

6.1.8.

Reduction measures contain any management or noise-reduction measures already in force or preparation as well as the description of any actions within the area covered by the action plan, which the competent authorities intend to take in the next five years.

6.1.8.1.

Agglomeration identifier

Unique identifier assigned to an agglomeration that is included in the noise action plan.

Optional.

6.1.8.2.

Noise source

Noise sources inside the agglomeration addressed by the noise action plan.

Mandatory.

6.1.8.3.

Existing measure

Noise abatement measures already existing when adopting the noise action plan.

Mandatory.

6.1.8.4.

Planned measure details

Description of the noise abatement measures that will be implemented within the action plan with expected benefits.

Mandatory.

6.1.8.5.

Planned measure costs

Cost for the implementation of the foreseen measures.

Optional.

6.1.8.6.

Measure in cost

Noise abatement measures included in the cost evaluation.

Optional.

6.1.9.

Affected people reduction contains the information about the estimates in terms of the reduction of people affected including the reduction of people suffering health effects of noise, which the competent authorities intend to take in the next five years.

6.1.9.1.

Agglomeration identifier

Unique identifier assigned to an agglomeration that is included in the noise action plan.

Optional.

6.1.9.2.

Noise source

Noise sources inside the agglomeration addressed by the noise action plan.

Mandatory.

6.1.9.3.

Number of people experiencing reduction

Estimated number of people experiencing noise reduction in the area covered by the action plan.

Mandatory if none amongst 6.1.9.5 to 6.1.9.7 is reported.

6.1.9.4.

Explanation on the estimation of the number of people experiencing reduction

Textual explanation of the methodology used to estimate the number of people experiencing reduction.

Mandatory if none amongst 6.1.9.5 to 6.1.9.7 is reported.

6.1.9.5.

Highly annoyed reduction

Estimated number of less people affected by high annoyance in the area covered by the action plan.

Optional.

6.1.9.6.

Highly sleep disturbed reduction

Estimated number of less people affected by high sleep disturbance in the area covered by the action plan.

Optional.

6.1.9.7.

Ischaemic heart disease reduction

For roads, estimated number of less cases of ischaemic heart disease in the area covered by the action plan.

For railways and air-traffic, estimated number of less people affected by an increased risk of ischaemic heart disease in the area covered by the action plan.

Optional.

6.1.9.8.

Other health effects reduction

Information on any other relevant health effect of noise that has been estimated in the action plan, in the area covered by the action plan.

Optional.

6.1.9.9.

Health impact explanation

Information on the assessment methods for harmful effects.

Optional.

6.1.9.10.

Estimated cost-benefit

Estimated cost-benefit of the measures described in the action plan.

Optional.

6.1.10.

Long term strategy

An indication of whether a long-term strategy to abate noise pollution is included in the noise action plan and an explanation of the strategy.

Mandatory.

6.1.11.

Estimated overall cost

Estimated overall cost of the action plan.

Optional.

6.1.12.

Quiet areas

Indication of whether any quiet area is described in the noise action plan.

Mandatory.

6.1.13.

Implementation mechanism

A description of the provisions envisaged for evaluating the implementation of the noise action plan.

Mandatory.

6.1.14.

Evaluation of results

A description of how the results of the noise action plan are evaluated.

Mandatory.

6.2.   Coverage area of noise action plans for agglomerations

Data to be reported

Content

Mandatory or optional nature of the reporting

6.2.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.2.2.

inspireId

External object identifier of the spatial object (coverage area of the noise action plan of the agglomeration).

Mandatory.

6.2.3.

Geometry

Spatial extent of the area covered by a noise action plan for agglomeration.

Mandatory.

6.2.4.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as Zone type, Specialized zone type, Environmental domain, Legal basis, Designation period, Competent authority, Life cycle information.

Mandatory.

6.3.   Noise action plans for major airports

Data to be reported

Content

Mandatory or optional nature of the reporting

6.3.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.3.2.

ICAO code

The unique international airport codes as defined by the International Civil Aviation Organization that are covered in the noise action plan.

Mandatory.

6.3.3.

Identifier of competent authority

Unique identifier of the competent authority responsible for action plan development, collection or approval.

Mandatory.

6.3.4.

Legal context information of the noise action plan.

6.3.4.1.

Noise action plan start date

Date when the noise action plan is adopted.

Mandatory.

6.3.4.2.

Noise action plan end (implementation) date

Date when the noise action plan is expected to be implemented.

Optional.

6.3.4.3.

Action plan document

Details of the document containing the action plan.

Optional.

6.3.4.4.

Additional description

Additional information about the legal framework of the noise action plan.

Optional.

6.3.5.

Limit values

Information on noise limit values in place considered for the evaluation and implementation of noise management and reduction actions. One of the two options shall be provided:

link to the existing noise limit report,

or

information on other noise limit values used as criteria for the evaluation and implementation of noise management and reduction actions within the area covered by the action plan.

Mandatory.

6.3.6.

Information on public consultation of the proposed noise action plan.

6.3.6.1.

Public consultation documentation summary

Summary of the public consultation documentation.

Optional.

6.3.6.2.

Public consultation period

Start and end date of the public consultation period.

Mandatory.

6.3.6.3.

Public consultation means

Means used to consult the public and reach different stakeholders.

Mandatory.

6.3.6.4.

Type of stakeholders

Type of stakeholders participating in the public consultation.

Optional.

6.3.6.5.

Number of participants

Number of people that participated in the public consultation.

Optional.

6.3.6.6.

Received comments

Explanation of whether any comments were received during the public consultation process.

Mandatory.

6.3.6.7.

Revision of noise action plan

Explanation of how a revision of the noise action plan has been conducted and how comments were taken into account after the public consultation process.

Mandatory.

6.3.7.

Noise mapping results include summary of information from the strategic noise maps within the area covered by the noise action plans, including the estimated number of people exposed to noise and the identification of problems and situations that need to be improved.

6.3.7.1.

ICAO code

Unique international code for an airport defined by the International Civil Aviation Organization that is included in the noise action plan.

Optional.

6.3.7.2.

Exposed Lden 55

Number of people exposed to equal or more than 55 dB Lden in the area covered by the noise action plan.

Mandatory.

6.3.7.3.

Exposed Lnight 50

Number of people exposed to equal or more than 50 dB Lnight in the area covered by the noise action plan.

Mandatory.

6.3.7.4.

Exposed to other indicator

Number of people exposed to another noise indicator than Lden and Lnight relevant for the noise action plan.

Optional.

6.3.7.5.

Situation for improvement

A description of the problems identified and situations that need to be improved.

Mandatory.

Optional to describe prioritization criteria used for developing the noise action plan.

6.3.8.

Reduction measures contain any management or noise-reduction measures already in force or preparation as well as the description of any actions within the area covered by the action plan, which the competent authorities intend to take in the next five years.

6.3.8.1.

ICAO code

Unique international code for an airport defined by the International Civil Aviation Organization that is included in the noise action plan.

Optional.

6.3.8.2.

Existing measure

Noise abatement measures already existing when adopting the noise action plan.

Mandatory.

6.3.8.3.

Planned measure details

Description of the noise abatement measures that will be implemented within the action plan with expected benefits.

Mandatory.

6.3.8.4.

Planned measure costs

Cost for the implementation of the foreseen measures.

Optional.

6.3.8.5.

Measure in cost

Noise abatement measures included in the cost evaluation.

Optional.

6.3.9.

Affected people reduction contains the information about the estimates in terms of the reduction of people affected including the reduction of people suffering health effects of noise, which the competent authorities intend to take in the next five years.

6.3.9.1.

ICAO Code

Unique international code for an airport defined by the International Civil Aviation Organization that is included in the noise action plan.

Optional.

6.3.9.2.

Number of people experiencing reduction

Estimated number of people experiencing noise reduction in the area covered by the action plan.

Mandatory if none amongst 6.3.9.4 to 6.3.9.6 is reported.

6.3.9.3.

Explanation on the estimation of the number of people experiencing reduction

Textual explanation of the methodology used to estimate the number of people experiencing reduction.

Mandatory if none amongst 6.3.9.4 to 6.3.9.6 is reported.

6.3.9.4.

Highly annoyed reduction

Estimated number of less people affected by high annoyance in the area covered by the action plan.

Optional.

6.3.9.5.

Highly sleep disturbed reduction

Estimated number of less people affected by high sleep disturbance in the area covered by the action plan.

Optional.

6.3.9.6.

Ischaemic heart disease reduction

Estimated number of less people affected by an increased risk of ischaemic heart disease in the area covered by the action plan.

Optional.

6.3.9.7.

Other health effects reduction

Information on any other relevant health effect of noise that has been estimated in the action plan, in the area covered by the action plan.

Optional.

6.3.9.8.

Health impact explanation

Information on the assessment methods for harmful effects.

Optional.

6.3.9.9.

Estimated-cost benefit

Estimated cost-benefit of the measures described in the action plan.

Optional.

6.3.10.

Long term strategy

An indication of whether a long-term strategy to abate noise pollution is included in the noise action plan and an explanation of the strategy.

Mandatory.

6.3.11.

Estimated overall cost

Estimated overall cost of the action plan.

Optional.

6.3.12.

Quiet areas

Explanation of whether any quiet area is described in the noise action plan.

Mandatory.

6.3.13.

Implementation mechanism

A description of the provisions envisaged for evaluating the implementation of the noise action plan.

Mandatory.

6.3.14.

Evaluation of results

A description of how the results of the noise action plan are evaluated.

Mandatory.

6.4.   Coverage area of noise action plan for major airports

Data to be reported

Content

Mandatory or optional nature of the reporting

6.4.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.4.2.

inspireId

External object identifier of the spatial object (coverage area of noise action plan for major airports).

Mandatory.

6.4.3.

Geometry

Spatial extent of the area covered by a noise action plan for airport.

Mandatory.

6.4.4.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as Zone type, Specialized zone type, Environmental domain, Legal basis, Designation period, Competent authority, Life cycle information.

Mandatory.

6.5.   Noise action plan for major railways

Data to be reported

Content

Mandatory or optional nature of the reporting

6.5.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.5.2.

Major railways included in the noise action plan

Indication of the major railways included in the noise action plan through rail identifiers or territorial units for statistics.

Mandatory.

6.5.3.

Identifier of competent authority

Unique identifier of the competent authority responsible for action plan development, collection or approval.

Mandatory.

6.5.4.

Legal context information of the noise action plan.

6.5.4.1.

Noise action plan start date

Date when the noise action plan is adopted.

Mandatory.

6.5.4.2.

Noise action plan end (implementation) date

Date when the noise action plan is expected to be implemented.

Optional.

6.5.4.3.

Action plan document

Details of the document containing the action plan.

Optional.

6.5.4.4.

Additional description

Additional information about the legal framework of the noise action plan.

Optional.

6.5.5.

Limit values

Information on noise limit values in place considered for the evaluation and implementation of noise management and reduction actions. One of the two options shall be reported:

link to the existing noise limit report,

or

information on other noise limit values used as criteria for the evaluation and implementation of noise management and reduction actions within the area covered by the action plan.

Mandatory.

6.5.6.

Information on public consultation of the proposed noise action plan.

6.5.6.1.

Public consultation documentation summary

Summary of the public consultation documentation.

Optional.

6.5.6.2.

Public consultation period

Start and end date of the public consultation period.

Mandatory.

6.5.6.3.

Public consultation means

Means used to consult the public and reach different stakeholders.

Mandatory.

6.5.6.4.

Type of stakeholders

Type of stakeholders participating in the public consultation.

Optional.

6.5.6.5.

Number of participants

Number of people that participated in the public consultation.

Optional.

6.5.6.6.

Received comments

Explanation of whether any comments were received during the public consultation process.

Mandatory.

6.5.6.7.

Revision of noise action plan

Explanation of how a revision of the noise action plan has been conducted and how comments were taken into account after the public consultation process.

Mandatory.

6.5.7.

Noise mapping results include summary of information from the strategic noise maps within the area covered by the noise action plans, including the estimated number of people exposed to noise and the identification of problems and situations that need to be improved.

6.5.7.1.

Rail identifier

Unique identifier assigned to a railway that is included in the noise action plan.

Optional.

6.5.7.2.

Exposed Lden 55

Number of people exposed to equal or more than 55 dB Lden in the area covered by the noise action plan.

Mandatory.

6.5.7.3.

Exposed Lnight 50

Number of people exposed to equal or more than 50 dB Lnight in the area covered by the noise action plan.

Mandatory.

6.5.7.4.

Exposed to other indicator

Number of people exposed to another noise indicator than Lden and Lnight relevant for the noise action plan.

Optional.

6.5.7.5.

Situation for improvement

A description of the problems identified and situations that need to be improved.

Mandatory.

Optional to describe prioritization criteria used for developing the noise action plan.

6.5.8.

Reduction measures contain any management or noise-reduction measures already in force or preparation as well as the description of any actions within the area covered by the action plan, which the competent authorities intend to take in the next five years.

6.5.8.1.

Rail identifier

Unique identifier assigned to a railway that is included in the noise action plan.

Optional.

6.5.8.2.

Existing measure

Noise abatement measures already existing when adopting the noise action plan.

Mandatory.

6.5.8.3.

Planned measure details

Description of the noise abatement measures that will be implemented within the action plan with expected benefits.

Mandatory.

6.5.8.4.

Planned measure costs

Cost for the implementation of the foreseen measures.

Optional.

6.5.8.5.

Measure in cost

Noise abatement measures included in the cost evaluation.

Optional.

6.5.9.

Affected people reduction contains the information about the estimates in terms of the reduction of people affected including the reduction of people suffering health effects of noise, which the competent authorities intend to take in the next five years.

6.5.9.1.

Rail identifier

Unique identifier assigned to a railway that is included in the noise action plan.

Optional.

6.5.9.2.

Number of people experiencing reduction

Estimated number of people experiencing noise reduction in the area covered by the action plan.

Mandatory if none amongst 6.5.9.4 to 6.5.9.6 is reported.

6.5.9.3.

Explanation on the estimation of the number of people experiencing reduction

Textual explanation of the methodology used to estimate the number of people experiencing reduction.

Mandatory if none amongst 6.5.9.4 to 6.5.9.6 is reported.

6.5.9.4.

Highly annoyed reduction

Estimated number of less people affected by high annoyance in the area covered by the action plan.

Optional.

6.5.9.5.

Highly sleep disturbed reduction

Estimated number of less people affected by high sleep disturbance in the area covered by the action plan.

Optional.

6.5.9.6.

Ischaemic heart disease reduction

Estimated number of less people affected by an increased risk of ischaemic heart disease in the area covered by the action plan.

Optional.

6.5.9.7.

Other health effects reduction

Information on any other relevant health effect of noise that has been estimated in the action plan, in the area covered by the action plan.

Optional.

6.5.9.8.

Health impact explanation

Information on the assessment methods for harmful effects.

Optional.

6.5.9.9.

Estimated-cost benefit

Estimated cost-benefit of the measures described in the action plan.

Optional.

6.5.10.

Long term strategy

An indication of whether a long-term strategy to abate noise pollution is included in the noise action plan and an explanation of the strategy.

Mandatory.

6.5.11.

Estimated overall cost

Estimated overall cost of the action plan.

Optional.

6.5.12.

Quiet areas

Explanation of whether any quiet area is described in the noise action plan.

Mandatory.

6.5.13.

Implementation mechanism

A description of the provisions envisaged for evaluating the implementation of the noise action plan.

Mandatory.

6.5.14.

Evaluation of results

A description of how the results of the noise action plan are evaluated.

Mandatory.

6.6.   Coverage area of noise action plan for major railways

Data to be reported

Content

Mandatory or optional nature of the reporting

6.6.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.6.2.

inspireId

External object identifier of the spatial object (coverage area of noise action plan for major railways).

Mandatory.

6.6.3.

Geometry

Spatial extent of the area covered by a noise action plan for major railways.

Mandatory.

6.6.4.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as Zone type, Specialized zone type, Environmental domain, Legal basis, Designation period, Competent authority, Life cycle information.

Mandatory.

6.7.   Noise action plan for major roads

Data to be reported

Content

Mandatory or optional nature of the reporting

6.7.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.7.2.

Major roads included in the noise action plan

Indication of the major roads included in the noise action plan through roads identifiers or territorial units for statistics.

Mandatory.

6.7.3.

Identifier of competent authority

Unique identifier of the competent authority responsible for action plan development, collection or approval.

Mandatory.

6.7.4.

Legal context information of the noise action plan.

6.7.4.1.

Noise action plan start date

Date when the noise action plan is adopted.

Mandatory.

6.7.4.2.

Noise action plan end (implementation) date

Date when the noise action plan is expected to be implemented.

Optional.

6.7.4.3.

Action plan document

Details of the document containing the action plan.

Optional.

6.7.4.4.

Additional description

Additional information about the legal framework of the noise action plan.

Optional.

6.7.5.

Limit values

Information on noise limit values in place considered for the evaluation and implementation of noise management and reduction actions. One of the two options shall be reported:

link to the existing noise limit report,

or

information on other noise limit values used as criteria for the evaluation and implementation of noise management and reduction actions within the area covered by the action plan.

Mandatory.

6.7.6.

Information on public consultation of the proposed noise action plan.

6.7.6.1.

Public consultation documentation summary

Summary of the public consultation documentation.

Optional.

6.7.6.2.

Public consultation period

Start and end date of the public consultation period.

Mandatory.

6.7.6.3.

Public consultation means

Means used to consult the public and reach different stakeholders.

Mandatory.

6.7.6.4.

Type of stakeholders

Type of stakeholders participating in the public consultation.

Optional.

6.7.6.5.

Number of participants

Number of people that participated in the public consultation.

Optional.

6.7.6.6.

Received comments

Explanation of whether any comments were received during the public consultation process.

Mandatory.

6.7.6.7.

Revision of noise action plan

Explanation of how a revision of the noise action plan has been conducted and how comments were taken into account after the public consultation process.

Mandatory.

6.7.7.

Noise mapping results include summary of information from the strategic noise maps within the area covered by the noise action plans, including the estimated number of people exposed to noise and the identification of problems and situations that need to be improved.

6.7.7.1.

Road identifier

Unique identifier assigned to a road that is included in the noise action plan.

Optional.

6.7.7.2.

Exposed Lden 55

Number of people exposed to equal or more than 55 dB Lden in the area covered by the noise action plan.

Mandatory.

6.7.7.3.

Exposed Lnight 50

Number of people exposed to equal or more than 50 dB Lnight in the area covered by the noise action plan.

Mandatory.

6.7.7.4.

Exposed to other indicator

Number of people exposed to another noise indicator than Lden and Lnight relevant for the noise action plan.

Optional.

6.7.7.5.

Situation for improvement

A description of the problems identified and situations that need to be improved.

Mandatory.

Optional to describe prioritization criteria used for developing the noise action plan.

6.7.8.

Reduction measures contain any management or noise-reduction measures already in force or preparation as well as the description of any actions within the area covered by the action plan, which the competent authorities intend to take in the next five years.

6.7.8.1.

Road identifier

Unique identifier assigned to a road that is included in the noise action plan.

Optional.

6.7.8.2.

Existing measure

Noise abatement measures already existing when adopting the noise action plan.

Mandatory.

6.7.8.3.

Planned measure details

Description of the noise abatement measures that will be implemented within the action plan with expected benefits.

Mandatory.

6.7.8.4.

Planned measure costs

Cost for the implementation of the foreseen measures.

Optional.

6.7.8.5.

Measure in cost

Noise abatement measures included in the cost evaluation.

Optional.

6.7.9.

Affected people reduction contains the information about the estimates in terms of the reduction of people affected including the reduction of people suffering health effects of noise, which the competent authorities intend to take in the next five years.

6.7.9.1.

Road identifier

Unique identifier assigned to a road that is included in the noise action plan.

Optional.

6.7.9.2.

Number of people experiencing reduction

Estimated number of people experiencing noise reduction in the area covered by the action plan.

Mandatory if none amongst 6.7.9.4 to 6.7.9.6 is reported.

6.7.9.3.

Explanation on the estimation of the number of people experiencing reduction

Textual explanation of the methodology used to estimate the number of people experiencing reduction.

Mandatory if none amongst 6.7.9.4 to 6.7.9.6 is reported.

6.7.9.4.

Highly annoyed reduction

Estimated number of less people affected by high annoyance in the area covered by the action plan.

Optional.

6.7.9.5.

Highly sleep disturbed reduction

Estimated number of less people affected by high sleep disturbance in the area covered by the action plan.

Optional.

6.7.9.6.

Ischaemic heart disease reduction

Estimated number of less cases of ischaemic heart disease in the area covered by the action plan.

Optional.

6.7.9.7.

Other health effects reduction

Information on any other relevant health effect of noise that has been estimated in the action plan, in the area covered by the action plan.

Optional.

6.7.9.8.

Health impact explanation

Information on the assessment methods for harmful effects.

Optional.

6.7.9.9.

Estimated-cost benefit

Estimated cost-benefit of the measures described in the action plan.

Optional.

6.7.10.

Long term strategy

An indication of whether a long-term strategy to abate noise pollution is included in the noise action plan and an explanation of the strategy.

Mandatory.

6.7.11.

Estimated overall cost

Estimated overall cost of the action plan.

Optional.

6.7.12.

Quiet areas

Explanation of whether any quiet area is described in the noise action plan.

Mandatory.

6.7.13.

Implementation mechanism

A description of the provisions envisaged for evaluating the implementation of the noise action plan.

Mandatory.

6.7.14.

Evaluation of results

A description of how the results of the noise action plan are evaluated.

Mandatory.

6.8.   Coverage area of noise action plan for major roads

Data to be reported

Content

Mandatory or optional nature of the reporting

6.8.1.

Noise action plan identifier

Unique identifier assigned to each noise action plan.

Mandatory.

6.8.2.

inspireId

External object identifier of the spatial object (coverage area of noise action plan for major roads).

Mandatory.

6.8.3.

Geometry

Spatial extent of the area covered by a noise action plan for major roads.

Mandatory.

6.8.4.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as Zone type, Specialized zone type, Environmental domain, Legal basis, Designation period, Competent authority, Life cycle information.

Mandatory.

Section 7

Delimited quiet areas in agglomerations or in open country

7.1.   Quiet areas in agglomerations or in open country

Note: for the information under 7.1. , if no quiet area is delimited, no information shall be reported.

Data to be reported

Content

Mandatory or optional nature of the reporting

7.1.1.

Quiet area identifier

Unique identifier assigned to each quiet area.

Mandatory.

7.1.2.

Quiet area name

Name of the quiet area.

Optional.

7.1.3.

Quiet area type

Description of the characteristics of the quiet area such as natural reserve, playground, green space.

Mandatory.

7.1.4.

Quiet area documentation

Any existing documentation related to the delimitation of the quiet area described.

Optional.

7.1.5.

Agglomeration identifier

Unique agglomeration identifier where the quiet area described is delimited.

Mandatory if quiet area is in an agglomeration.

7.1.6.

Protection from noise sources

Defines the noise sources against which the quiet area is protected.

Optional.

7.1.7.

Protection from other noise sources

Additional noise sources against which the quiet area is protected.

Optional.

7.1.8.

Protection measures

Measures for protecting the designated quiet area from noise.

Mandatory.

7.1.9.

Noise action plan identifier

Unique identifier of noise action plan that includes protection or preservation of a quiet area.

Mandatory if quiet area is included in a noise action plan.

7.1.10.

inspireId

External object identifier of the spatial object (quiet area).

Mandatory.

7.1.11.

Geometry

Spatial extent of the quiet area.

Mandatory.

7.1.12.

Additional information as required by Commission Regulation (EU) No 1089/2010

Additional attributes such as Zone type, Specialized zone type, Environmental domain, Legal basis, Designation period, Competent authority, Life cycle information.

Mandatory.


(1)  Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services (OJ L 323, 8.12.2010, p. 11).

(2)  Regulation (EC) No 1059/2003 of the European Parliament and of the Council of 26 May 2003 on the establishment of a common classification of territorial units for statistics (NUTS) (OJ L 154 21.6.2003, p. 1).

(3)  Regulation (EC) No 1059/2003 of the European Parliament and of the Council of 26 May 2003 on the establishment of a common classification of territorial units for statistics (NUTS), OJ L 154, 21.06.2003 p. 1.


Top