Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 32022R0247

Commission Delegated Regulation (EU) 2022/247 of 14 December 2021 amending Regulation (EU) 2018/956 of the European Parliament and of the Council as regards the data on new heavy-duty vehicles to be monitored and reported by Member States and by manufacturers and the reporting procedure (Text with EEA relevance)

C/2021/8909

OJ L 41, 22.2.2022, p. 11–13 (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force

ELI: http://data.europa.eu/eli/reg_del/2022/247/oj

22.2.2022   

EN

Official Journal of the European Union

L 41/11

COMMISSION DELEGATED REGULATION (EU) 2022/247

of 14 December 2021

amending Regulation (EU) 2018/956 of the European Parliament and of the Council as regards the data on new heavy-duty vehicles to be monitored and reported by Member States and by manufacturers and the reporting procedure

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) 2018/956 of the European Parliament and of the Council of 28 June 2018 on the monitoring and reporting of CO2 emissions from and fuel consumption of new heavy-duty vehicles (1), and in particular Article 11(1)(a) and (d) thereof,

Whereas:

(1)

Part A of Annex I to Regulation (EU) 2018/956 specifies the data to be monitored and reported by the Member States relating to new heavy-duty vehicles registered for the first time in the Union.

(2)

In order to provide for a thorough analysis in accordance with Article 10 of Regulation (EU) 2018/956, Member States should monitor and report data that allow determining the vehicle axle configuration of reported vehicles on the basis of the number of powered axles. Such data is recorded in entry 3 of the certificate of conformity of a newly registered heavy-duty vehicle.

(3)

That information would allow the Commission to identify vehicles falling within the scope of data reported by the manufacturers pursuant to Article 5 of Regulation (EU) 2018/956 based on information reported by the Member States without necessitating additional exchanges with manufacturers.

(4)

Based on the experience gained from preparing the report in accordance with Article 10 for the reporting period of the year 2019 and in order to provide a thorough analysis of reported data in the coming years, it is necessary that manufacturers report specific data on the behaviour of individual vehicle components during the run of the simulation tool as recorded in the ‘sum exec data file’.

(5)

Annex II to Regulation (EU) 2018/956 sets out the monitoring and reporting procedure.

(6)

Based on the experience gained from the application of Regulation (EU) 2018/956, the European Environment Agency should have the flexibility to adapt the structure and character of the databases to technical progress and should not be bound by specific technical determinations. The descriptive names of the databases should thus be removed from Annex II.

(7)

Regulation (EU) 2018/956 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

Amendments to Regulation (EU) 2018/956

Annexes I and II to Regulation (EU) 2018/956 are amended in accordance with the Annex to this Regulation.

Article 2

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 14 December 2021.

For the Commission

The President

Ursula VON DER LEYEN

(1)  OJ L 173, 9.7.2018, p. 1.

ANNEX

Annexes I and II to Regulation (EU) 2018/956 are amended as follows:

(1)

Annex I is amended as follows:

(a)

in Part A, the following point (p) is added:

‘(p)

for vehicles registered from 1 July 2021, the number of powered axles, as specified in entry 3 of the certificate of conformity.’;

(b)

in Part B, point 2, the table is amended as follows:

(i)

the following entry is added to:

‘102

For vehicles with a date of simulation as of 1 July 2021, the comma separated values file of the same name as the job file and with an extension.vsum comprising aggregated results per simulated mission profile and payload condition (10)

File generated by the simulation tool referred to in Article 5(1)(a) of Regulation (EU) 2017/2400 in its graphical user interface (GUI) version

‘sum exec data file’’;

(ii)

Note 10 is replaced by the following:

‘(10)

This entry shall not be made publicly available in the Central Register on heavy-duty vehicles.’;

(2)

Annex II is amended as follows:

(a)

in point 1.1, the first subparagraph is replaced by the following:

‘1.1.

The data specified in Annex I, Part A, shall be transmitted in accordance with Article 4 by the contact point of the competent authority via electronic data transfer to the European Environment Agency (‘the Agency’).’;

(b)

point 2.1(c) is replaced by the following:

‘(c)

the contact point responsible for transmitting the data to the Agency.’;

(c)

in point 2.3, the first subparagraph is replaced by the following:

‘2.3.

The data specified in Part B, point 2, of Annex I shall be transmitted in accordance with Article 5(1) by the contact point of the manufacturer via electronic data transfer to the Agency.’;

(d)

point 3.3 is replaced by the following:

‘3.3.

Where a competent authority or manufacturer identify errors in the data submitted, they shall without delay notify those to the Commission and the Agency by submitting an error notification report to the Agency and by email sent to the addresses referred to in point 1.1.’.
Top