Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 32017R0062

Commission Implementing Regulation (EU) 2017/62 of 14 December 2016 concerning the authorisation of 3-(methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane as feed additives for all animal species (Text with EEA relevance. )

C/2016/8236

OJ L 13, 17.1.2017, p. 186–213 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force

ELI: http://data.europa.eu/eli/reg_impl/2017/62/oj

17.1.2017   

EN

Official Journal of the European Union

L 13/186

COMMISSION IMPLEMENTING REGULATION (EU) 2017/62

of 14 December 2016

concerning the authorisation of 3-(methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane as feed additives for all animal species

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition (1), and in particular Article 9(2) thereof,

Whereas:

(1)

Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC (2).

(2)

3-(Methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane (‘the substances concerned’) were authorised without a time limit in accordance with Directive 70/524/EEC as feed additives for all animal species. Those products were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.

(3)

In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of the substances concerned as feed additives for all animal species. The applicant requested those additives to be classified in the additive category ‘sensory additives’. That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.

(4)

The European Food Safety Authority (‘the Authority’) concluded in its opinion of 17 April 2013 (3) that, under the proposed conditions of use in feed the substances concerned do not have adverse effects on animal health, human health or the environment. For allyl isothiocyanate, the Authority stated that, although additional exposure to that substance through its low use level in animal feeds would not substantially increase consumer exposure, the estimated exposure of consumers is already higher than the acceptable daily intake. For allyl isothiocyanate and 2-methylpropane-1-thiol maximum contents should be set up to ensure consumer safety and environmental protection, respectively. The Authority further concluded that the function of the substances concerned in feed is similar to that on food. The Authority has already concluded that for food the substances concerned are efficacious, as it increases the food smell or palatability. Therefore, that conclusion can be extrapolated for feed. The Authority could not conclude on the safety of the substances concerned used in water for drinking. However, those substances can be used within compound feeds which are subsequently administered via water.

(5)

Restrictions and conditions should be provided for to allow better control. For all the substances except allyl isothiocyanate and 2-methylpropane-1-thiol, since safety reasons do not require the setting of a maximum content and, taking into account the re-evaluation performed by the Authority, recommended contents should be indicated on the label of the additive. Where such contents are exceeded, certain information should be indicated on the label of premixtures, compound feeds and feed materials.

(6)

The Authority concluded that the substances concerned are to be considered as being irritant to skin, eyes and respiratory tract and as a skin sensitiser. Consequently, appropriate protective measures should be taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.

(7)

The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation.

(8)

Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.

(9)

The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,

HAS ADOPTED THIS REGULATION:

Article 1

Authorisation

The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2

Transitional measures

1.   The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.

2.   Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.

3.   Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 14 December 2016.

For the Commission

The President

Jean-Claude JUNCKER

(1)  OJ L 268, 18.10.2003, p. 29.

(2)  Council Directive 70/524/EEC of 23 November 1970 concerning additives in feeding-stuffs (OJ L 270, 14.12.1970, p. 1).

(3)  EFSA Journal 2013;11(5):3208.

ANNEX

Identification number of the additive

Name of the holder of authorisation

Additive

Composition, chemical formula, description, analytical method

Species or category of animal

Maximum age

Minimum content

Maximum content

Other provisions

End of period of authorisation

mg of active substance/kg of complete feedingstuff with a moisture content of 12 %

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Category: Sensory additives. Functional group: Flavouring compounds

2b12001

—

3-(Methylthio)propionaldehyde

Additive composition

3-(Methylthio) propionaldehyde

Characterisation of the active substance

3-(Methylthio) propionaldehyde

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C4H8OS

CAS number 3268-49-3

FLAVIS No 12.001

Method of analysis  (1)

For the determination of 3-(methylthio) propionaldehyde in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12002

—

Methyl 3-(methylthio)propionate

Additive composition

Methyl 3-(methylthio)propionate

Characterisation of the active substance

Methyl 3-(methylthio)propionate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C5H10O2S

CAS number 13532-18-8

FLAVIS No 12.002

Method of analysis  (1)

For the determination of methyl 3-(methylthio)propionate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12004

—

Allylthiol

Additive composition

Allylthiol

Characterisation of the active substance

Allylthiol

Produced by chemical synthesis

Purity: min. 75 % (min. 98 % allylthiol + allyl sulphide + allyl mercaptan)

Chemical formula: C3H6S

CAS number 870-23-5

FLAVIS No 12.004

Method of analysis  (1)

For the determination of allylthiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12006

—

Dimethyl sulfide

Additive composition

Dimethyl sulfide

Characterisation of the active substance

Dimethyl sulfide

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C2H6S

CAS number 75-18-3

FLAVIS No 12.006

Method of analysis  (1)

For the determination of dimethyl sulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12007

—

Dibutyl sulfide

Additive composition

Dibutyl sulfide

Characterisation of the active substance

Dibutyl sulfide

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C8H18S

CAS number 544-40-1

FLAVIS No 12.007

Method of analysis  (1)

For the determination of dibutyl sulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12008

—

Diallyl disulfide

Additive composition

Diallyl disulfide

Characterisation of the active substance

Diallyl disulfide

Produced by chemical synthesis

Purity: min. 80 % (min. 98 % diallyl disulphide +allyl sulphide + allyl mercaptan)

Chemical formula: C6H10S2

CAS number 2179-57-9

FLAVIS No 12.008

Method of analysis  (1)

For the determination of diallyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12009

—

Diallyl trisulfide

Additive composition

Diallyl trisulfide

Characterisation of the active substance

Diallyl trisulfide

Produced by chemical synthesis

Purity: min. 65 % (min.95 % allyl di-, tri- and tetra sulfides)

Chemical formula: C6H10S3

CAS number 2050-87-5

FLAVIS No 12.009

Method of analysis  (1)

For the determination of diallyl trisulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12013

—

Dimethyl trisulfide

Additive composition

Dimethyl trisulfide

Characterisation of the active substance

Dimethyl trisulfide

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C2H6S3

CAS number 3658-80-8

FLAVIS No 12.013

Method of analysis  (1)

For the determination of dimethyl trisulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12014

—

Dipropyl disulfide

Additive composition

Dipropyl disulfide

Characterisation of the active substance

Dipropyl disulfide

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C6H14S2

CAS number 629-19-6

FLAVIS No 12.014

Method of analysis  (1)

For the determination of dipropyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12025

—

Allyl isothiocyanate

Additive composition

Allyl isothiocyanate

Characterisation of the active substance

Allyl isothiocyanate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C4H5NS

CAS number 57-06-7

FLAVIS No 12.025

Method of analysis  (1)

For the identification of allyl isothiocyanate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

0,05

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12026

—

Dimethyl disulfide

Additive composition

Dimethyl disulfide

Characterisation of the active substance

Dimethyl disulfide

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C2H6S2

CAS number 624-92-0

FLAVIS No 12.026

Method of analysis  (1)

For the determination of dimethyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12027

—

2-Methylbenzene-1-thiol

Additive composition

2-Methylbenzene-1-thiol

Characterisation of the active substance

2-Methylbenzene-1-thiol

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C7H8S

CAS number 137-06-4

FLAVIS No 12.027

Method of analysis  (1)

For the determination of 2-methylbenzene-1-thiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12032

—

S-Methyl butanethioate

Additive composition

S-Methyl butanethioate

Characterisation of the active substance

S-Methyl butanethioate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C5H10OS

CAS number 2432-51-1

FLAVIS No 12.032

Method of analysis  (1)

For the determination of S-methyl butanethioate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12037

—

Allyl methyl disulfide

Additive composition

Allyl methyl disulfide

Characterisation of the active substance

Allyl methyl disulfide

Produced by chemical synthesis

Purity: min. 90 %

Chemical formula: C4H8S2

CAS number 2179-58-0

FLAVIS No 12.037

Method of analysis  (1)

For the determination of allyl methyl disulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12062

—

3-(Methylthio)propan-1-ol

Additive composition

3-(Methylthio)propan-1-ol

Characterisation of the active substance

3-(Methylthio)propan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C4H10OS

CAS number 505-10-2

FLAVIS No 12.062

Method of analysis  (1)

For the determination of 3-(methylthio)propan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12063

—

3-(Methylthio)hexan-1-ol

Additive composition

3-(Methylthio)hexan-1-ol

Characterisation of the active substance

3-(Methylthio)hexan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C7H16OS

CAS number 51755-66-9

FLAVIS No 12.063

Method of analysis  (1)

For the determination of 3-(methylthio)hexan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12071

—

1-Propane-1-thiol

Additive composition

1-Propane-1-thiol

Characterisation of the active substance

1-Propane-1-thiol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C3H8S

CAS number 107-03-9

FLAVIS No 12.071

Method of analysis  (1)

For the determination of 1-propane-1-thiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12088

—

Diallyl sulfide

Additive composition

Diallyl sulfide

Characterisation of the active substance

Diallyl sulfide

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C6H10S

CAS number 592-88-1

FLAVIS No 12.088

Method of analysis  (1)

For the determination of diallyl sulfide in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12118

—

2,4-Dithiapentane

Additive composition

2,4-Dithiapentane

Characterisation of the active substance

2,4-Dithiapentane

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C3H8S2

CAS number 1618-26-4

FLAVIS No 12.118

Method of analysis  (1)

For the determination of 2,4-dithiapentane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12168

—

2-Methyl-2-(methyldithio) propanal

Additive composition

2-Methyl-2-(methyldithio)propanal

Characterisation of the active substance

2-Methyl-2-(methyldithio)propanal

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C5H10OS2

CAS number 67952-60-7

FLAVIS No 12.168

Method of analysis  (1)

For the determination of 2-methyl-2-(methyldithio) propanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12173

—

2-Methylpropane-1-thiol

Additive composition

2-Methylpropane-1-thiol

Characterisation of the active substance

2-Methylpropane-1-thiol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C4H10S

CAS number 513-44-0

FLAVIS No 12.173

Method of analysis  (1)

For the identification of 2-methylpropane-1-thiol in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

0,04

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12175

—

Methylsulfinyl methane

Additive composition

Methylsulfinylmethane

Characterisation of the active substance

Methylsulfinylmethane

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C2H6OS

CAS number 67-68-5

FLAVIS No 12.175

Method of analysis  (1)

For the determination of methylsulfinylmethane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b12197

—

Propane-2-thiol

Additive composition

Propane-2-thiol

Characterisation of the active substance

Propane-2-thiol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C3H8S

CAS number 75-33-2

FLAVIS No 12.197

Method of analysis  (1)

For the determination of propane-2-thiol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b15025

—

3,5-Dimethyl-1,2,4-trithiolane

Additive composition

3,5-Dimethyl-1,2,4-trithiolane

Characterisation of the active substance

3,5-Dimethyl-1,2,4-trithiolane

Produced by chemical synthesis

Purity: min. 90 %

Secondary components: diethyl trisulphide, dimethylbenzylcarbinol, N,N-dimethyl-ethanethioamide, 4,6-dimethyl1,2,3,5-tetracyclohexane, 3-methyl-1,2,4-trithiolane, 2-methyl-4-propyl 1,3-oxathiane

Chemical formula: C4H8S3

CAS number 23654-92-4

FLAVIS No 15.025

Method of analysis  (1)

For the determination of 3,5-dimethyl-1,2,4-trithiolane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

2b16030

—

2-Methyl-4-propyl-1,3-oxathiane

Additive composition

2-Methyl-4-propyl-1,3-oxathiane

Characterisation of the active substance

2-Methyl-4-propyl-1,3-oxathiane

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H16OS

CAS number 67715-80-4

FLAVIS No 16.030

Method of analysis  (1)

For the determination of 2-methyl-4-propyl-1,3-oxathiane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

—

—

1.

The additive shall be incorporated into the feed in the form of a premixture.

2.

In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.

The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.

On the label of the additive the following shall be indicated:

‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’.

5.

The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.

6.

For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.

6 February 2027

(1)  Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports

Top