Energeetika
-
Small punch tensile/fracture test data for P91 ar material at 500 °C and a displacement rate of .005 mm/s (second repeat test)
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile...
(6 kuvad)
-
Small punch tensile/fracture test data for 15-15 Ti ar cw material at 600 °C and a displacement rate of .005 mm/s (second repeat test)
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(4 kuvad)
-
Small punch tensile/fracture test data for Zircaloy 4 material at 20 °C and a displacement rate of .005 mm/s (repeat test)
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(4 kuvad)
-
Small punch tensile/fracture test data for 15-15 Ti ar cw material at 300 °C and a displacement rate of .005 mm/s (third repeat test)
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(6 kuvad)
-
Small punch tensile/fracture test data for 15-15 Ti ar cw material at 800 °C and a displacement rate of .005 mm/s
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(8 kuvad)
-
Small punch tensile/fracture test data for Gr. 91 material at -170 °C and a displacement rate of .005 mm/s
In the framework of its institutional project on Gen IV nuclear reactors, the JRC-IET performs pre-normative materials qualification research within the work package PreMaQ. The...
(4 kuvad)
-
Small punch tensile/fracture test data for 15-15 Ti ar cw material at 20 °C and a displacement rate of .005 mm/s (repeat test)
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(6 kuvad)
-
Small punch tensile/fracture test data for Gr. 91 material at -130 °C and a displacement rate of .5 mm/s
In the framework of its institutional project on Gen IV nuclear reactors, the JRC-IET performs pre-normative materials qualification research within the work package PreMaQ. The...
(8 kuvad)
-
Small punch tensile/fracture test data for Zircaloy 4 material at 400 °C and a displacement rate of .005 mm/s
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(8 kuvad)
-
Small punch tensile/fracture test data for P91 ar material at 550 °C and a displacement rate of .005 mm/s (repeat test)
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile...
(6 kuvad)
-
Small punch tensile/fracture test data for P91 ar material at 20 °C and a displacement rate of .005 mm/s
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile...
(10 kuvad)
-
Small punch tensile/fracture test data for S355J2+N n material at -130 °C and a displacement rate of .005 mm/s
A data collection created at the JRC in the scope of a co-operation between TNO and JRC to determine the capacity of the small punch tensile/fracture testing procedure to qualify the...
(6 kuvad)
-
Small punch tensile/fracture test data for 15-15 Ti ar cw material at 300 °C and a displacement rate of .005 mm/s
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(9 kuvad)
-
Small punch tensile/fracture test data for 15-15 Ti ar cw material at 700 °C and a displacement rate of .005 mm/s (repeat test)
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(10 kuvad)
-
Small punch tensile/fracture test data for P92 material at 22 °C and a displacement rate of .00833 mm/s (second repeat test)
Small punch tensile and creep data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. For estimating the tensile properties a series of...
(7 kuvad)
-
Small punch tensile/fracture test data for P91 ar material at 500 °C and a displacement rate of .005 mm/s (repeat test)
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile...
(1 kuvad)
-
Operating Experience Feedback (OEF) records
This is the core content of the information system as they refer to operating experience feedback. The objective of this content type is to make available and disseminate relevant...
-
Small punch tensile/fracture test data for S355J2+N n material at -165 °C and a displacement rate of .005 mm/s
A data collection created at the JRC in the scope of a co-operation between TNO and JRC to determine the capacity of the small punch tensile/fracture testing procedure to qualify the...
(10 kuvad)
-
Small punch tensile/fracture test data for P91 ar material at 22 °C and a displacement rate of .005 mm/s
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile...
(10 kuvad)
-
Small punch tensile/fracture test data for 15-15 Ti material at 400 °C and a displacement rate of .005 mm/s
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.
(13 kuvad)
