Parameter

Data format

Applicability to vehicle categories (Yes, No, Optional, Open Point)

Parameters for technical compatibility between Vehicle and the network(s) of area of use

1. Traction vehicles

2. Hauled passenger vehicles

3. Freight wagons

4. Special vehicles

‘4.5.2

Design mass

Heading (no data)

4.5.2.1

Design mass in working order

[number] kg

Y

Y

N

Y

Y

4.5.2.2

Design mass under normal payload

[number] kg

Y

Y

N

Y

Y

4.5.2.3

Design mass under exceptional payload

[number] kg

Y

Y

N

Y

Y

4.5.3

Static axle load

Heading (no data)

4.5.3.1

Static axle load in working order

[number] kg

Y

Y

N

Y

Y

4.5.3.2

Static axle load under normal payload

[number] kg

Y

Y

N

Y

Y

4.5.3.3

Static axle load under exceptional payload

[number] kg

Y

Y

N

Y

Y

4.5.3.4

Position of the axles along the unit (axle spacing):

a: Distance between axles

b: Distance from end axle to the end of the nearest coupling plane

c: distance between two inside axles

a [number] m

b [number] m

c [number] m

Explanation of the values for a, b and c [character string]

Y

Y

N

Y

Y

4.5.5

Total vehicle mass (for each vehicle of the unit)

[number] kg

Y

Y

N

Y

Y

4.5.6

Mass per wheel

[number] kg

Y

Y

N

Y

Y

4.6

Rolling stock dynamic behaviour

Heading (no data)

4.6.4

Combination of maximum speed and maximum cant deficiency for which the vehicle was assessed

[number] km/h - [number] mm

Y

Y

Y

Y

Y

4.6.5

Rail inclination

[character string] from a predefined list

Y

Y

Y

Y

Y

4.7

Braking

Heading (no data)

4.7.1

Maximum average deceleration

[number] m/s2

Y

N

N

Y

N

4.7.2

Thermal capacity

Heading (no data)

4.7.2.1

Brake performance on steep gradients with normal payload

Heading (no data)

4.7.2.1.1

Reference case of TSI

[character string] from a predefined list

Y

Y

Y

Y

N

4.7.2.1.2

Speed (if no reference case is indicated)

[number] km/h

Y

Y

Y

Y

N

4.7.2.1.3

Gradient (if no reference case is indicated)

[number] ‰ (mm/m)

Y

Y

Y

Y

N

4.7.2.1.4

Distance (if no reference case is indicated)

[number] km

Y

Y

Y

Y

N

4.7.2.1.5

Time (if distance is not indicated) (if no reference case is indicated)

[number] min

Y

Y

Y

Y

N

4.7.2.1.6

Maximum brake thermal energy capacity

[number] kJ

Y

Y

Y

Y

N

4.7.3

Parking brake

Heading (no data)

4.7.3.3

Maximum gradient on which the unit is kept immobilised by the parking brake alone (if the vehicle is fitted with it)

[number] ‰ (mm/m)

Y

Y

N

Y

N

4.7.3.4

Parking brake

[Boolean] Y/N

N

N

Y

N

N

4.7.4

Braking systems fitted on the vehicle

Heading (no data)

4.7.4.1

Eddy current brake

Heading (no data)

4.7.4.1.1

Eddy current track brake fitted

[Boolean] Y/N

Y

Y

N

Y

Y

4.7.4.1.2

Possibility of preventing the use of the eddy current track brake (only if fitted with eddy current track brake)

[Boolean] Y/N

Y

Y

N

Y

Y

4.7.4.2

Magnetic brake

Heading (no data)

4.7.4.2.1

Magnetic track brake fitted

[Boolean] Y/N

Y

Y

N

Y

Y

4.7.4.2.2

Possibility of preventing the use of the magnetic track brake (only if fitted with magnetic brake)

[Boolean] Y/N

Y

Y

N

Y

Y

4.7.4.3

Regenerative brake (only for vehicles with electrical traction)

Heading (no data)

4.7.4.3.1

Regenerative brake fitted

[Boolean] Y/N

Y

N

N

Y

Y

4.7.4.3.2

Possibility of preventing the use of the regenerative brake (only if fitted with regenerative brake)

[Boolean] Y/N

Y

N

N

Y

Y

4.7.5

Emergency brake: Stopping distance and deceleration profile for each load condition per design maximum speed

[number] m [number] m/s2

Y

Y

N

Y

N

4.7.6

For general operation:

Brake weight percentage (lambda) or Braked mass

Lambda (%) [number] tonnes

Y

Y

Y

Y

N

4.7.7

Service brake:

At maximum service brake: Stopping distance, Maximum deceleration, for the load condition ‘design mass under normal payload’ at the design maximum speed.

[number] m [number] m/s2

Y

Y

Y

Y

N

4.7.8

Wheel slide protection system

[Boolean] Y/N

Y

Y

Y

Y

N

4.8

Geometrical characteristics

Heading (no data)

4.8.1

Vehicle length

[number] m

Y

Y

N

Y

N

4.8.2

Minimum in-service wheel diameter

[number] mm

Y

Y

Y

Y

Y

4.8.4

Minimum horizontal curve radius capability

[number] m

Y

Y

N

Y

Y

4.8.5

Minimum vertical convex curve radius capability

[number] m

Y

Y

Y

Y

N

4.8.6

Minimum vertical concave curve radius capability

[number] m

Y

Y

Y

Y

N’