(1)

Section 1 is replaced by the following:

‘1.   TYPES DEFINED IN EUROPEAN AND INTERNATIONAL STANDARDS

The following common types, used in attributes or association roles of spatial object types or data types, are defined as follows:

(2)

Section 3 is deleted;

(3)

Section 4 is replaced by the following:

‘4.   COMMON CODE LISTS

4.1.   Vertical Position (VerticalPositionValue)

The relative vertical position of a spatial object.

4.2.   Condition of Facility (ConditionOfFacilityValue)

The status of a facility with regards to its completion and use.

4.3.   Country Code (CountryCode)

Country code as defined in the Interinstitutional Style Guide published by the Publications Office of the European Union.

4.4.   Legislation Level (LegislationLevelValue)

The level at which a legal act or convention has been adopted.

4.5.   Party Role (PartyRoleValue)

Roles of parties related to or responsible for a resource.

The values for this code list comprise the values of the following code lists or other code lists specified by data providers:

4.6.   Climate and Forecast Standard Names (CFStandardNamesValue)

Definitions of phenomena observed in meteorology and oceanography.

4.7.   Gender (GenderValue)

Gender of a person or group of persons.’;

(4)

Section 5.3 is replaced by the following:

‘5.3.   Code Lists

5.3.1.   Connection Type (ConnectionTypeValue)

Types of connections between different networks.

5.3.2.   Link Direction (LinkDirectionValue)

List of values for directions relative to a link.’;

(5)

Section 7.2.3 is replaced by the following:

‘7.2.3.   Code Lists

7.2.3.1.   Process Parameter Name (ProcessParameterNameValue)

A code list of names of process parameters.’;

(6)

in Section 7.3, the following Sections 7.3.1.8, 7.3.1.9, 7.3.1.10 are added:

‘7.3.1.8.   Abstract Observable Property (AbstractObservableProperty)

An abstract class that represents an observable property (or phenomenon).

This type is abstract.

Attributes of the data type AbstractObservableProperty

7.3.1.9.   Composite Observable Property (CompositeObservableProperty)

A composite of multiple Observable Properties.

This type is a sub-type of AbstractObservableProperty.

Attributes of the data type CompositeObservableProperty

Association roles of the data type CompositeObservableProperty

7.3.1.10.   Observable Property (ObservableProperty)

Represents a single observable property e.g. ‘temperature’.

This type is a sub-type of AbstractObservableProperty.

Attributes of the data type ObservableProperty

Association roles of the data type ObservableProperty

(7)

Section 7.3.2 is deleted;

(8)

Section 7.3.3 is replaced by the following:

‘7.3.3.   Code Lists

7.3.3.1.   Phenomenon Type (PhenomenonTypeValue)

A code list of phenomena (e.g. temperature, wind speed).

This code list comprises the values of the following code lists or other code lists defined by data providers:

7.3.3.2.   Statistical Function Type (StatisticalFunctionTypeValue)

A code list of statistical functions (e.g. maximum, minimum, mean).

7.3.3.3   Comparison Operator (ComparisonOperatorValue)

Acode list of comparison operators (e.g. greater than, less than, equal to).’

(1)

Section 1.3.4 is replaced by the following:

‘1.3.4.   Other Coordinate Reference Systems

Exceptions, where other coordinate reference systems than those listed in 1.3.1, 1.3.2 or 1.3.3 may be used, are:

The geodetic codes and parameters needed to describe these other coordinate reference systems and to allow conversion and transformation operations shall be documented and an identifier shall be created in a coordinate systems register established and operated by the Commission, according to EN ISO 19111 and ISO 19127.

The Commission shall be assisted by the INSPIRE Commission expert group in the maintenance and update of the coordinate systems register.’;

(2)

Section 3.3 is replaced by the following:

‘3.3   Code Lists

3.3.1.   Grammatical Gender (GrammaticalGenderValue)

The grammatical gender of a geographical name.

3.3.2.   Grammatical Number (GrammaticalNumberValue)

The grammatical number of a geographical name.

3.3.3.   Name Status (NameStatusValue)

The status of a geographical name, that is the information enabling to discern which credit should be given to the name with respect to its standardisation and/or its topicality.

3.3.4.   Named Place Type (NamedPlaceTypeValue)

The type of a named place.

3.3.5.   Nativeness (NativenessValue)

The nativeness of a geographical name.’;

(3)

Section 4.2.3 is deleted;

(4)

Section 4.2.4 is replaced by the following:

‘4.2.4.   Code Lists

4.2.4.1.   Administrative Hierarchy Level (AdministrativeHierarchyLevel)

Levels of administration in the national administrative hierarchy. This code list reflects the level in the hierarchical pyramid of the administrative structures, which is based on geometric aggregation of territories and does not necessarily describe the subordination between the related administrative authorities.

4.2.4.2.   Legal Status (LegalStatusValue)

Description of the legal status of administrative boundaries.

4.2.4.3.   Technical Status (TechnicalStatusValue)

Description of the technical status of administrative boundaries.’;

(5)

Section 4.3.3 is replaced by the following:

‘4.3.3.   Code Lists

4.3.3.1.   Baseline Segment Type (BaselineSegmentTypeValue)

The types of baselines used to measure the breadth of the territorial sea.

4.3.3.2.   Maritime Zone Type (MaritimeZoneTypeValue)

Type of maritime zone.’;

(6)

in Section 5.2.1, the second table is replaced by the following:

(7)

Section 5.4 is replaced by the following:

‘5.4.   Code Lists

5.4.1.   Geometry Method (GeometryMethodValue)

Description of how and by whom this geographic position of the address was created or derived.

5.4.2.   Geometry Specification (GeometrySpecificationValue)

Information defining the specification used to create or derive this geographic position of the address.

5.4.3.   Locator Designator Type (LocatorDesignatorTypeValue)

Description of the semantics of the locator designator.

5.4.4.   Locator Level (LocatorLevelValue)

The level to which the locator refers.

5.4.5.   Locator Name Type (LocatorNameTypeValue)

Description of the semantics of the locator name.

5.4.6.   Part Type (PartTypeValue)

A classification of the part of name according to its semantics in the complete thoroughfare name.

5.4.7.   Status (StatusValue)

Current validity of the real world address or address component.’;

(8)

Section 6.2 is replaced by the following:

‘6.2.   Code Lists

6.2.1.   Cadastral Zoning Level (CadastralZoningLevelValue)

Levels of hierarchy of the cadastral zonings.’;

(9)

Section 7.3.2 is deleted;

(10)

Section 7.3.3 is replaced by the following:

‘7.3.3.   Code Lists

7.3.3.1.   Access Restriction (AccessRestrictionValue)

Types of access restrictions for a transport element.

7.3.3.2.   Restriction Type (RestrictionTypeValue)

Possible restrictions on vehicles that can access a transport element.

7.3.3.3.   Transport Type (TransportTypeValue)

Possible types of transport networks.’;

(11)

in Section 7.4.1.3, the second table is replaced by the following:

(12)

Section 7.4.2 is replaced by the following:

‘7.4.2.   Code Lists

7.4.2.1.   Aerodrome Category (AerodromeCategoryValue)

Aerodrome possible categories concerning the scope and importance of the air traffic services offered from and to it.

7.4.2.2.   Aerodrome Type (AerodromeTypeValue)

A code specifying whether a particular entity occurrence is an Aerodrome or a Heliport.

7.4.2.3.   Air Route Link Class (AirRouteLinkClassValue)

The type of the route from the navigation point of view.

7.4.2.4.   Air Route Type (AirRouteTypeValue)

The route classification as ATS route or North Atlantic Tracks.

7.4.2.5.   Air Use Restriction (AirUseRestrictionValue)

The use restrictions for an air network object.

7.4.2.6.   Airspace Area Type (AirspaceAreaTypeValue)

Recognised types of Airspace.

7.4.2.7.   Navaid Type (NavaidTypeValue)

Types of Navaid Services.

7.4.2.8.   Point Role (PointRoleValue)

Role of the Runway Centreline Point.

7.4.2.9.   Runway Type (RunwayTypeValue)

A code that makes a distinction between runways for airplanes and FATO for helicopters.

7.4.2.10.   Surface Composition (SurfaceCompositionValue)

A code indicating the composition of a surface.’;

(13)

Section 7.5.2 is replaced by the following:

‘7.5.2.   Code Lists

7.5.2.1.   Cableway Type (CablewayTypeValue)

The possible types of cableway transport.’;

(14)

in Section 7.6.1.7, the table Attributes of the spatial object type RailwayLink is deleted;

(15)

Section 7.6.2 is deleted;

(16)

Section 7.6.3 is replaced by the following:

‘7.6.3.   Code Lists

7.6.3.1.   Form Of Railway Node (FormOfRailwayNodeValue)

The possible functions of a railway node within the railway network.

7.6.3.2.   Railway Type (RailwayTypeValue)

The possible types of railway transport.

7.6.3.3.   Railway Use (RailwayUseValue)

The possible uses of railways.

7.6.3.4.   Minimum Or Maximum Track Number (MinMaxTrackValue)

Values to indicate whether number of tracks are counted as the maximum, minimum or average number.

7.6.3.5.   Track Gauge Category (TrackGaugeCategoryValue)

The possible categories of railways concerning its nominal track gauge.’;

(17)

Section 7.7.2 is deleted;

(18)

Section 7.7.3 is replaced by the following:

‘7.7.3.   Code Lists

7.7.3.1.   Area Condition (AreaConditionValue)

Speed limit restriction depending on the area.

7.7.3.2.   Form Of Road Node (FormOfRoadNodeValue)

Functions of road nodes.

7.7.3.3.   Form Of Way (FormOfWayValue)

Classification based on the physical properties of the road link.

7.7.3.4.   Road Part (RoadPartValue)

Indication to which part of a road the value of a measurement applies.

7.7.3.5.   Road Service Type (RoadServiceTypeValue)

Types of road service areas.

7.7.3.6.   Road Surface Category (RoadSurfaceCategoryValue)

Values to indicate whether a road is paved or not paved.

7.7.3.7.   Service Facility (ServiceFacilityValue)

Possible service facilities available at a road service area.

7.7.3.8.   Speed Limit Source (SpeedLimitSourceValue)

Possible sources for speed limits.

7.7.3.9.   Vehicle Type (VehicleTypeValue)

Possible types of vehicles.

7.7.3.10.   Weather Condition (WeatherConditionValue)

Values to indicate weather conditions that affect speed limits.

7.7.3.11   Functional Road Class (FunctionalRoadClassValue)

Values for the functional road classification. This classification is based on the importance of the role that the road performs in the road network.

7.7.3.12.   Minimum Or Maximum Lane Number (MinMaxLaneValue)

Values to indicate whether number of lanes are counted as the maximum, minimum or average number.

7.7.3.13.   Nature Of Speed Limit (SpeedLimitMinMaxValue)

Possible values to indicate the nature of a speed limit.’;

(19)

in Section 7.8.1.13, in the second subparagraph, the sentence ‘This type is abstract.’ is deleted;

(20)

Section 7.8.2 is deleted;

(21)

Section 7.8.3 is replaced by the following:

‘7.8.3.   Code Lists

7.8.3.1.   Ferry Use (FerryUseValue)

Types of transport carried out by a ferry.

7.8.3.2.   Form Of Waterway Node (FormOfWaterwayNodeValue)

Function of a Waterway Node in the water transport network.

7.8.3.3.   CEMT Class (CEMTClassValue)

Inland waterway classification according to CEMT (European Conference of Ministers of Transport) Resolution No 92/2.’;

(22)

in Section 8.3.1.1, the first table is replaced by the following:

(23)

Section 8.4.2. is replaced by the following:

‘8.4.2.   Code Lists

8.4.2.1.   Hydro Node Category (HydroNodeCategoryValue)

Defines categories for different types of hydrographic network nodes.’;

(24)

in Section 8.5.1.3, the first table is replaced by the following:

(25)

in Section 8.5.1.3,the final sentence is replaced by the following:

‘Constraints of the spatial object type DrainageBasin

A river basin may not be contained in any other basin.

The geometry attribute has to be of type GM_Surface or GM_MultiSurface.’;

(26)

Section 8.5.3 is deleted;

(27)

Section 8.5.4 is replaced by the following:

‘8.5.4.   Code Lists

8.5.4.1.   Crossing Type (CrossingTypeValue)

Man-made physical watercourse crossing types.

8.5.4.2.   Hydrological Persistence (HydrologicalPersistenceValue)

Categories of hydrological persistence of a body of water.

8.5.4.4.   Shore Type (ShoreTypeValue)

Categories of shore area composition.

8.5.4.5.   Water Level (WaterLevelValue)

The tidal datum/waterlevel to which depths and heights are referenced.

8.5.4.6.   Origin (OriginValue)

A code list type specifying a set of hydrographic ‘origin’ categories (natural, man-made) for various hydrographic objects.’;

(28)

in Section 9.1.1, the first table is replaced by the following:

(29)

in Section 9.2.1, the table is replaced by the following:

(30)

Section 9.3 is deleted;

(31)

Section 9.4 is replaced by the following:

‘9.4.   Code Lists

9.4.1.   Designation Scheme (DesignationSchemeValue)

The scheme used to assign a designation to the Protected Sites.

This code list may be extended by the Member States.

9.4.2.   Designation (DesignationValue)

Classification and designation types under different schemes.

This code list comprises the values of the code lists specified in Sections 9.4.3-9.4.8 or other code lists defined by data providers.

9.4.3.   IUCN Designation (IUCNDesignationValue)

A code list for the International Union for the Conservation of Nature classification scheme.

9.4.4.   National Monuments Record Designation (NationalMonumentsRecordDesignationValue)

A code list for the National Monuments Record classification scheme.

9.4.5.   Natura2000 Designation (Natura2000DesignationValue)

A code list for the Natura2000 designation scheme, in accordance with Council Directive 92/43/EEC (*1) (Habitats Directive).

9.4.6.   Ramsar Designation (RamsarDesignationValue)

A code list for the Convention on Wetlands of International Importance (Ramsar Convention) designation scheme.

9.4.7.   Unesco Man And Biosphere Programme Designation (UNESCOManAndBiosphereProgrammeDesignationValue)

A code list for the Man and Biosphere Programme classification scheme.

9.4.8.   Unesco World Heritage Designation (UNESCOWorldHeritageDesignationValue)

A code list for the World Heritage designation scheme.

9.4.9.   Protection Classification (ProtectionClassificationValue)

The protected site classification based on the purpose of protection.

(*1)  Council Directive 92/43/EEC of 21 May 1992 on the conservation of natural habitats and of wild fauna and flora (OJ L 206, 22.7.1992, p. 7).’ "

(1)

Section 1.3.1 is replaced by the following:

‘1.3.1.   Code Lists

1.3.1.1.   Elevation Property Type (ElevationPropertyTypeValue)

Code list type which determines the elevation property which has been measured or calculated.

1.3.1.2.   Surface Type (SurfaceTypeValue)

Code list type which determines the elevation surface with regard to its relative adherence to the Earth’s bare surface.’;

(2)

Section 1.5.3 is deleted;

(3)

Section 1.5.4 is replaced by the following:

‘1.5.4.   Code Lists

1.5.4.1.   Breakline Type (BreakLineTypeValue)

List of possible type values for break lines based on the physical characteristics of the break line [in the elevation surface].

1.5.4.2.   Spot Elevation Classification (SpotElevationClassValue)

Possible classification values for spot elevations based on the LAS specification maintained by the American Society for Photogrammetry and Remote Sensing (ASPRS).

1.5.4.3.   Spot Elevation Type (SpotElevationTypeValue)

Possible values for spot elevation points that describe a singularity of the surface.

1.5.4.4.   Contour Line Type (ContourLineTypeValue)

List of possible categories of contour lines based on the equidistance parameter of the data set.’;

(4)

Section 2.3.2 is replaced by the following:

‘2.3.2.   Code Lists

2.3.2.1.   Land Cover Class (LandCoverClassValue)

Land cover code list or classification.’;

(5)

in Section 2.4.1.2, the following table is added:

‘Association roles of the spatial object type LandCoverUnit

(6)

in Section 2.6, first sentence, the words ‘an onlineDescription attribute’ are replaced by the words ‘an externalDescription attribute’.

(7)

Section 3.4 is replaced by the following:

‘3.4.   Code Lists

3.4.1.   Interpolation Method (InterpolationMethodValue)

List of codes that identify the interpolation methods which may be used for evaluating orthoimage coverages.’;

(8)

Section 4.2.3 is replaced by the following:

‘4.2.3.   Code Lists

4.2.3.1.   Anthropogenic Geomorphologic Feature Type (AnthropogenicGeomorphologicFeatureTypeValue)

Types of anthropogenic geomorphologic features.

4.2.3.2.   Borehole Purpose (BoreholePurposeValue)

Purposes for which a borehole was drilled.

4.2.3.3.   Collection Type (CollectionTypeValue)

Types of collections of geological and geophysical objects.

4.2.3.4.   Composition Part Role (CompositionPartRoleValue)

Roles that a compositional part plays in a geologic unit.

4.2.3.5.   Event Environment (EventEnvironmentValue)

Terms for the geologic environments within which geologic events take place.

4.2.3.6.   Event Process (EventProcessValue)

Terms specifying the process or processes that occurred during an event.

4.2.3.7.   Fault Type (FaultTypeValue)

Terms describing the type of shear displacement structure.

4.2.3.8.   Fold Profile Type (FoldProfileTypeValue)

Terms specifying the type of fold.

4.2.3.9.   Geochronologic Era (GeochronologicEraValue)

Terms specifying recognised geological time units.

4.2.3.10.   Geologic Unit Type (GeologicUnitTypeValue)

Terms describing the type of geologic unit.

4.2.3.11.   Geomorphologic Activity (GeomorphologicActivityValue)

Terms indicating the level of activity of a geomorphologic feature.

4.2.3.12.   Lithology (LithologyValue)

Terms describing the lithology.

4.2.3.13.   Mapping Frame (MappingFrameValue)

Terms indicating the surface on which the MappedFeature is projected.

4.2.3.14.   Natural Geomorphologic Feature Type (NaturalGeomorphologicFeatureTypeValue)

Terms describing the type of natural geomorphologic feature.

4.2.3.15.   Thematic Class (ThematicClassValue)

Values for thematic classification of geologic features.

4.2.3.16.   Thematic Classification (ThematicClassificationValue)

List of thematic classifications for geologic features.’;

(9)

Section 4.3.2 is replaced by the following:

‘4.3.2.   Code Lists

4.3.2.1.   Campaign Type (CampaignTypeValue)

A type of geophysical campaign.

4.3.2.2.   Network Name (NetworkNameValue)

A name of geophysical network.

4.3.2.3.   Platform Type (PlatformTypeValue)

A platform on which data acquisision was carried out.

4.3.2.4.   Profile Type (ProfileTypeValue)

Type of geophysical profile.

4.3.2.5.   Station Rank (StationRankValue)

A rank of geophysical station.

4.3.2.6.   Station Type (StationTypeValue)

A type of geophysical station.

4.3.2.7.   Survey Type (SurveyTypeValue)

A type of geophysical survey or data set.

4.3.2.8.   Swath Type (SwathTypeValue)

A type of geophysical swath.’;

(10)

Section 4.4.3 is replaced by the following:

‘4.4.3.   Code Lists

4.4.3.1.   Active Well Type (ActiveWellTypeValue)

Types of active wells.

4.4.3.2.   Aquifer Media Type (AquiferMediaTypeValue)

Values describing the characteristics of the aquifer medium.

4.4.3.3.   Aquifer Type (AquiferTypeValue)

Types of aquifers.

4.4.3.4.   Condition Of Groundwater (ConditionOfGroundwaterValue)

Values indicating the approximate degree of change which has taken place on the natural state of groundwater.

4.4.3.5.   Hydrogeochemical Rock Type (HydroGeochemicalRockTypeValue)

Values describing the hydrogeochemical condition of the groundwater environment.

4.4.3.6.   Natural Object Type (NaturalObjectTypeValue)

Types of natural hydrogeological objects.

4.4.3.7.   Status Code Type (StatusCodeTypeValue)

Values describing the statuses of man-made hydrogeological objects.

4.4.3.8.   Water Persistence (WaterPersistenceValue)

Types of hydrological persistence of water.

4.4.3.9.   Water Salinity (WaterSalinityValue)

A code list indicating salinity classes in water.’

(1)

in Section 1.3.1, in the introductory wording, the words ‘The package Vector’ are replaced by the words ‘The package Statistical Units Vector’.

(2)

in Section 1.3.1.1, the first table is replaced by the following:

(3)

Section 1.3.3 is replaced by the following:

‘1.3.3.   Code Lists

1.3.3.1.   Geometry Type (GeometryTypeValue)

The code values for the geometry types.

1.3.3.2.   Evolution Type (EvolutionTypeValue)

The code values for evolution types.

1.3.3.3.   Statistical Unit Type (StatisticalUnitTypeValue)

The code values for statistical unit types.’;

(4)

in Section 1.4.1.1, all text that follows the second table is replaced by the following:

‘ Constraints of the spatial object type StatisticalGridCell

The cell position shall be within the grid, according to its width and height.

At least one of the attributes code, geographicalPosition, gridPosition or geometry shall be provided.

Where several spatial representations are provided (code, geographicalPosition, gridPosition and geometry), they shall be consistent.

The code shall be composed of:

For both cases, the given position shall be the position of the lower left cell corner.’;

(5)

Section 1.5 is replaced by the following:

‘1.5.    Theme-specific Requirements

(6)

in Section 2.3.1.3, the table is replaced by the following:

(7)

Section 2.3.3 is replaced by the following:

‘2.3.3.   Code Lists

2.3.3.1.   Building Nature (BuildingNatureValue)

Values indicating the nature of a building.

2.3.3.2.   Condition Of Construction (ConditionOfConstructionValue)

Values indicating the condition of a construction.

2.3.3.3.   Current Use (CurrentUseValue)

Values indicating the current use.

2.3.3.4.   Elevation Reference (ElevationReferenceValue)

List of possible elements considered to capture a vertical geometry.

2.3.3.5.   Height Status (HeightStatusValue)

Values indicating the method used to capture a height.

2.3.3.6.   Horizontal Geometry Reference (HorizontalGeometryReferenceValue)

Values indicating the element considered to capture a horizontal geometry.’;

(8)

in Sections 3.1.3, 3.1.5, 3.1.9, 3.1.10, 3.1.11, 3.1.12, 3.2.1, 3.2.5 all occurrences of ‘RangeType’ are replaced by ‘RangeType (as defined in Section 3.2.6)’;

(9)

Section 3.3 is replaced by the following:

‘3.3.   Code Lists

3.3.1.   FAO Horizon Master (FAOHorizonMasterValue)

A code list of the master part of the horizon designation.

3.3.2.   FAO Horizon Subordinate (FAOHorizonSubordinateValue)

A code list of designations of subordinate distinctions and features within the master horizons and layers, which are based on profile characteristics observable in the field and are applied during the description of the soil at the site.

3.3.3.   FAO Prime (FAOPrimeValue)

A prime and double prime may be used to connotate the master horizon symbol of the lower of two (prime) or three (double prime) horizons having identical Arabic-numeral prefixes and letter combinations.

3.3.4.   Other Horizon Notation Type (OtherHorizonNotationTypeValue)

A classification of a soil horizon according to a specific classification system.

3.3.5.   Other Soil Name Type (OtherSoilNameTypeValue)

An identification of the soil profile according to a specific classification scheme.

3.3.6.   Layer Genesis Process State (LayerGenesisProcessStateValue)

An indication whether the process specified in layerGenesisProcess is ongoing or has ceased.

3.3.7.   Layer Type (LayerTypeValue)

A classification of a layer according to the concept that fits the purpose.

3.3.8.   Profile Element Parameter Name (ProfileElementParameterNameValue)

Properties that can be observed to characterise the profile element.

3.3.9.   Soil Derived Object Parameter Name (SoilDerivedObjectParameterNameValue)

Soil-related properties that can be derived from soil and other data.

3.3.10.   Soil Investigation Purpose (SoilInvestigationPurposeValue)

A code list of possible values indicating the reasons for conducting a survey.

3.3.11.   Soil Plot Type (SoilPlotTypeValue)

A code list of terms specifying on what kind of plot the observation of the soil is made.

3.3.12.   Soil Profile Parameter Name (SoilProfileParameterNameValue)

Properties that can be observed to characterise the soil profile.

3.3.13.   Soil Site Parameter Name (SoilSiteParameterNameValue)

Properties that can be observed to characterise the soil site.

3.3.14.   WRB Qualifier Place (WRBQualifierPlaceValue)

A code list of values indicating the placement of the Qualifier with regard to the WRB reference soil group (RSG). The placement can be in front of the RSG i.e. ‘prefix’ or it can be behind the RSG i.e. ‘suffix’.

3.3.15.   WRB Qualifiers (WRBQualifierValue)

A code list of possible qualifiers of the World Reference Base for Soil Resources.

3.3.16.   WRB Reference Soil Group (RSG) (WRBReferenceSoilGroupValue)

A code list of possible reference soil groups (i.e. first level of classification of the World Reference Base for Soil Resources).

3.3.17.   WRB Specifiers (WRBSpecifierValue)

A code list of possible specifiers.’;

(10)

Section 4.3.2 is replaced by the following:

‘4.3.2.   Code Lists

4.3.2.1.   HILUCS (HILUCSValue)

List of land use categories to be used in INSPIRE Land Use.

4.3.2.2.   Land Use Classification (LandUseClassificationValue)

List of land use categories to be used in INSPIRE Land Use and agreed at a national or local level.’;

(11)

in Section 4.7.2.1, the table is replaced by the following:

(12)

Section 4.7.3 is replaced by the following:

‘4.7.3.   Code Lists

4.7.3.1.   Level Of Spatial Plan (LevelOfSpatialPlanValue)

Territorial hierarchy of plan.

4.7.3.2.   Process Step General (ProcessStepGeneralValue)

General indication of the step in the planning process that the plan is undergoing.

4.7.3.3.   Regulation Nature (RegulationNatureValue)

Legal nature of the land use indication.

4.7.3.4.   Plan Type Name (PlanTypeNameValue)

Types of plans as defined in the Member States.

4.7.3.5.   Specific Supplementary Regulation (SpecificSupplementaryRegulationValue)

Category of supplementary regulation provided in a specific nomenclature of supplementary regulations provided by the data provider.

4.7.3.6.   Supplementary Regulation (SupplementaryRegulationValue)

Types of conditions and constraints in spatial plans.’;

(13)

Section 5.1.6 is replaced by the following:

‘5.1.6.   Environmental Health Determinant Measure (EnvHealthDeterminantMeasure)

A raw measurement performed at some place that is of interest for human health determinant analysis.

Attributes of the spatial object type EnvHealthDeterminantMeasure

Constraints of the spatial object type EnvHealthDeterminantMeasure

Environmental health determinant measure shall be provided either as measure (attribute ‘measure’) or category of measure (attribute ‘category’).’;

(14)

the following Sections 5.1.6a and 5.1.6b are inserted:

‘5.1.6a   Environmental Health Determinant Noise Measure (EnvHealthDeterminantNoiseMeasure)

A noise measurement that is of interest for human health determinant analysis.

This type is a sub-type of EnvHealthDeterminantMeasure.

Attributes of the spatial object type EnvHealthDeterminantNoiseMeasure

5.1.6b   Environmental Health Determinant Concentration Measure (EnvHealthDeterminantConcentrationMeasure)

A concentration measurement that is of interest for human health determinant analysis.

This type is a sub-type of EnvHealthDeterminantMeasure.

Attributes of the spatial object type EnvHealthDeterminantConcentrationMeasure

(15)

Sections 5.2.8, 5.2.9, 5.2.10, 5.2.11 are deleted;

(16)

Section 5.3 is replaced by the following:

‘5.3.   Code Lists

5.3.1.   Cause Of Death (CODValue)

Data on causes of death (COD) provide information on mortality patterns and form a major element of public health information.

5.3.2.   Chemical (ChemicalValue)

Name of the chemical substance.

5.3.3.   Environment Health Component Type (ComponentTypeValue)

Particular component type (chemical substance, biological species, etc.) whose concentration in an environmental media is measured.

5.3.4.   Disease Measure Type (DiseaseMeasureTypeValue)

Different ways how data on diseases and related health problems in a population can be reported.

5.3.5.   Environment Health Determinant Type (EnvHealthDeterminantTypeValue)

Type of environmental health determinant.

5.3.6.   General Health Type (GeneralHealthTypeValue)

Type of health status indicator.

5.3.7.   Health Services Type (HealthServicesTypeValue)

Type of health care indicator.

5.3.8.   International Classification Of Diseases (ICDValue)

Disease as defined in the International Classification of Diseases, 10th revision.

5.3.9.   Matrix (MatrixValue)

Type of human tissue or compartment for biomarker measurement.

5.3.10.   Environmental Health Media Type (MediaTypeValue)

The media in which the concentration of a health component is measured.

5.3.11.   Noise Source Type (NoiseSourceTypeValue)

The noise source type values.

5.3.12.   Statistical Aggregation Method (StatisticalAggregationMethodValue)

The types of statistical methods used to aggregate raw measurement data on the statistical unit.’;

(17)

Section 6.2.2 is replaced by the following:

‘6.2.2   Code Lists

6.2.2.1.   Appurtenance Type (AppurtenanceTypeValue)

Classification of appurtenances.

This code list comprises the values of the following code lists or other code lists specified by data providers:

6.2.2.2.   Specific Appurtenance Type (SpecificAppurtenanceTypeValue)

Domain-specific classification of appurtenances.

6.2.2.3.   Utility Delivery Type (UtilityDeliveryTypeValue)

Classification of utility delivery types.

6.2.2.4.   Utility Network Type (UtilityNetworkTypeValue)

Classification of utility network types.

6.2.2.5.   Warning Type (WarningTypeValue)

Classification of warning types.’;

(18)

Section 6.3.2 is replaced by the following:

‘6.3.2.   Code Lists

6.3.2.1.   Electricity Appurtenance Type (ElectricityAppurtenanceTypeValue)

Classification of electricity appurtenances.’;

(19)

Section 6.4.2 is replaced by the following:

‘6.4.2.   Code Lists

6.4.2.1.   Oil, Gas and Chemicals Appurtenance Type (OilGasChemicalsAppurtenanceTypeValue)

Classification of oil, gas, chemicals appurtenances.

6.4.2.2.   Oil, Gas and Chemicals Product Type (OilGasChemicalsProductTypeValue)

Classification of oil, gas and chemicals products.’;

(20)

Section 6.5.2 is replaced by the following:

‘6.5.2.   Code Lists

6.5.2.1.   Sewer Appurtenance Type (SewerAppurtenanceTypeValue)

Classification of sewer appurtenances.

6.5.2.2.   Sewer Water Type (SewerWaterTypeValue)

Classification of sewer water types.’;

(21)

Section 6.6.2 is replaced by the following:

‘6.6.2.   Code Lists

6.6.2.1.   Thermal Appurtenance Type (ThermalAppurtenanceTypeValue)

Classification of thermal appurtenances.

6.6.2.2.   Thermal Product Type (ThermalProductTypeValue)

Classification of thermal products.’;

(22)

Section 6.7.2 is replaced by the following:

‘6.7.2.   Code Lists

6.7.2.1.   Water Appurtenance Type (WaterAppurtenanceTypeValue)

Classification of water appurtenances.

6.7.2.2.   Water Type (WaterTypeValue)

Classification of water types.’;

(23)

Section 6.8.2 is replaced by the following:

‘6.8.2.   Code Lists

6.8.2.1.   Environmental Facility Classification (EnvironmentalManagementFacilityTypeValue)

Classification of environmental facilities, e.g. as sites and installations.’;

(24)

in Section 6.9.2.2, the table is replaced by the following:

(25)

Section 6.9.3 is replaced by the following:

‘6.9.3.   Code Lists

6.9.3.1.   Service Type (ServiceTypeValue)

Code list containing a classification of governmental services.’;

(26)

in Section 7.1.2, the first table is replaced by the following:

(27)

Section 7.3 is replaced by the following:

‘7.3.   Code Lists

7.3.1.   Measurement Regime (MeasurementRegimeValue)

Categories for different types of the MeasurementRegime.

7.3.2.   Media (MediaValue)

Categories for different types of media.

7.3.3.   Process Type (ProcessTypeValue)

Categories for different process types.

7.3.4.   Purpose Of Collection (PurposeOfCollectionValue)

Categories for different purposes of collections.

7.3.5.   Result Acquisition Source (ResultAcquisitionSourceValue)

Categories for different types of the ResultAcquisitionSource.

7.3.6.   Result Nature (ResultNatureValue)

State of the result of an observation.

7.3.7.   Specialised EMF Type (SpecialisedEMFTypeValue)

Categories for different types of EnvironmentalMonitoringFacilities.’;

(28)

Section 8.2.2 is replaced by the following:

(29)

in Section 8.2.3, the table is replaced by the following:

(30)

Section 8.4 is replaced by the following:

‘8.4.   Code Lists

8.4.1.   Pollution Abatement Technique (PollutionAbatementTechniqueValue)

Methods for reducing pollutant concentration due to the emissions of a technical component, typically a chimney.

8.4.2.   Installation Type (InstallationTypeValue)

Values denoting the operative function which has to be performed by an installation.

8.4.3.   Installation Part Type (InstallationPartTypeValue)

Values denoting the operative function which has to be performed by an installation part.

8.4.4.   River Basin District (RiverBasinDistrictValue)

Code identifiers and/or names assigned to river basin districts.

8.4.5.   Type of Production Building (TypeOfProductionBuildingValue)

Classification of production and industrial buildings.’;

(31)

Section 9.4 is replaced by the following:

‘9.4.   Code Lists

9.4.1.   Livestock Species (LivestockSpeciesValue)

Classification of livestock species.

9.4.2.   Aquaculture Species (AquacultureSpeciesValue)

Classification of aquaculture species.’;

(32)

Section 10.3 is replaced by the following:

‘10.3.   Code Lists

10.3.1.   Classification Type (ClassificationTypeValue)

Code values for classification types.

10.3.2.   Classification Item Type (ClassificationItemTypeValue)

Code values for classification items.

This code list comprises the values of the following code lists or other code lists defined by data providers:

10.3.3.   Variable (VariableValue)

Code values for variable names.

10.3.4.   Statistics Measurement Method (StatisticsMeasurementMethodValue)

Code values for statistics measurement method.

10.3.5.   Status of Statistical Data (StatisticalDataStatusValue)

Code values for status.

10.3.6.   Special Value (SpecialValue)

Code values for special values.’;

(33)

Section 11.3 is replaced by the following:

‘11.3.   Code Lists

11.3.1.   Zone Type Code (ZoneTypeCode)

High-level classification defining the type of Management, Restriction or Regulation Zone.

11.3.2.   Specialised Zone Type Code (SpecialisedZoneTypeCode)

Additional classification value that defines the specialised type of zone.

11.3.3.   Environmental Domain (EnvironmentalDomain)

Environmental domain, for which environmental objectives can be defined.’;

(34)

in Section 12.2.1, the first table is replaced by the following:

(35)

in Section 12.2.2, the first table is replaced by the following:

(36)

in Section 12.2.4, the first table is replaced by the following:

(37)

in Section 12.3.4, the table is replaced by the following:

(38)

Section 12.4 is deleted;

(39)

Section 12.5 is replaced by the following:

‘12.5.   Code Lists

12.5.1.   Exposed Element Category (ExposedElementCategoryValue)

A classification of the exposed element.

12.5.2.   Natural Hazard Category (NaturalHazardCategoryValue)

A generic classification of types of natural hazards.

12.5.3.   Specific Exposed Element Type (SpecificExposedElementTypeValue)

An additional denomination of exposed elements.

12.5.4.   Specific Hazard Type (SpecificHazardTypeValue)

An additional classification of the natural hazard.

12.5.5.   Determination Method (DeterminationMethodValue)

A code list to describe the method used to define the area of hazard or risk.’;

(40)

Section 13.1 is replaced by the following:

‘13.1.    Structure of the Spatial Data Themes Atmospheric Conditions and Meteorological Geographical Features

The types specified for the spatial data themes Atmospheric Conditions and Meteorological Geographical Features are structured in the following packages:

(41)

Section 13.2.1 is replaced by the following:

‘13.2.1.   Code Lists

13.2.1.1.   EU Air Quality Reference Component (EU_AirQualityReferenceComponentValue)

Definitions of phenomena regarding air quality in the context of reporting under Union legislation.

13.2.1.2.   WMO GRIB Code and Flags Table 4.2 (GRIB_CodeTable4_2Value)

Definitions of phenomena observed in meteorology.’;

(42)

Section 14.2.1 is replaced by the following:

‘14.2.1.   Code Lists

14.2.1.1.   BODC P01 Parameter Usage (BODC_P01ParameterUsageValue)

Definitions of phenomena observed in oceanography.’;

(43)

Section 15.1.2 is replaced by the following:

(44)

Section 15.1.3 is replaced by the following:

(45)

Section 15.1.6 is deleted;

(46)

the following Section 15.2.4 is added:

(47)

Section 15.3 is replaced by the following:

‘15.3.   Code Lists

15.3.1.   Sea Area Type Classification (SeaAreaTypeClassificationValue)

Classification type of the SeaArea, e.g. estuary, openOcean.

15.3.2.   Sea Bed Cover (SeaBedCoverValue)

Types of cover found on sea beds.

15.3.3.   Sea Surface Classification (SeaSurfaceClassificationValue)

Types of sea surface layers found on sea surfaces.

15.3.4.   Shore Stability (ShoreStabilityValue)

Types of the stability of shore segments.

15.3.5.   Shore Type Classification (ShoreTypeClassificationValue)

Types of shore segments.

15.3.6.   Zone Type (ZoneTypeValue)

Types of marine circulation zones.’;

(48)

Section 16.2 is replaced by the following:

‘16.2.   Code Lists

16.2.1.   Region Classification Level (RegionClassificationLevelValue)

Codes defining the classification level of the region class.

16.2.2.   Region Classification Scheme (RegionClassificationSchemeValue)

Codes defining the various bio-geographical regions.

16.2.3.   Region Classification (RegionClassificationValue)

Codes used to define the various bio-geographical regions.

This code list comprises the values of the following code lists or other code lists defined by data providers:

(*3)  Directive 2008/56/EC of the European Parliament and of the Council of 17 June 2008 establishing a framework for community action in the field of marine environmental policy (Marine Strategy Framework Directive) (OJ L 164, 25.6.2008, p. 19).’;"

(49)

Section 17.4 is replaced by the following:

‘17.4.   Code Lists

17.4.1.   Qualifier Local Name (QualifierLocalNameValue)

List of values that specify the relation between a locally used name and a name used at the pan-European level.

17.4.2.   Reference Habitat Type Code (ReferenceHabitatTypeCodeValue)

Values used in the Pan-European habitat classification schemes.

This code list comprises the values of the following code lists:

17.4.3.   Reference Habitat Type Scheme (ReferenceHabitatTypeSchemeValue)

This value defines which pan-European habitat classification scheme has been used.

17.4.4.   Local Name Code (LocalNameCodeValue)

Identifier taken from any local classification scheme.’;

(50)

in the table in Section 18.3.2, in the third entry populationSize, the words ‘RangeType’ in the third column are replaced by ‘RangeType (as defined in Section 18.3.3)’;

(51)

Section 18.4 is replaced by the following:

‘18.4.   Code Lists

18.4.1.   Counting Method (CountingMethodValue)

Method for producing numbers indicating the abundance of a species within an aggregation unit.

18.4.2.   Counting Unit (CountingUnitValue)

The defined unit used to express a counted or estimated number indicating the abundance of a species in a SpeciesDistributionUnit.

18.4.3.   Local Species Name Code (LocalSpeciesNameCodeValue)

Species identifier taken from any local classification scheme.

18.4.4.   Occurrence Category (OccurrenceCategoryValue)

The species population density in the SpeciesDistributionUnit.

18.4.5.   Population Type (PopulationTypeValue)

The permanency of populations, particularly with regard to migratory species within a given species distribution unit.

18.4.6.   Qualifier (QualifierValue)

This value defines the relation between the taxonomic concepts of a local species name and the reference species name given by reference species identifier or by a reference species scheme.

18.4.7.   Reference Species Code (ReferenceSpeciesCodeValue)

Reference lists containing species identifiers.

This code list comprises the values of the following code lists:

18.4.8.   Reference Species Scheme (ReferenceSpeciesSchemeValue)

Reference lists defining a nomenclatural and taxonomical standard to which local names and taxonomic concepts can be mapped.

18.4.9.   Residency Status (ResidencyStatusValue)

Category of the residency of the occurrences or estimated population within a given aggregation unit.

(*4)  Commission Implementing Decision 2011/484/EU of 11 July 2011 concerning a site information format for Natura 2000 sites (OJ L 198, 30.7.2011, p. 39).’;"

(52)

in Section 19.3.1.3, the table is replaced by the following:

(53)

Section 19.3.2 is replaced by the following:

‘19.3.2.   Code Lists

19.3.2.1.   Classification and Quantification Framework (ClassificationAndQuantificationFrameworkValue)

Values for the most widely used classification schemes to classify and quantify energy resources.

19.3.2.2.   Fossil Fuel Class (FossilFuelClassValue)

Values indicating the various levels of fossil fuel resources.

19.3.2.3.   Renewable and Waste (RenewableAndWasteValue)

Types of renewable and waste resources.

19.3.2.4.   Fossil Fuel (FossilFuelValue)

Types of fossil fuels.

19.3.2.5.   Vertical Reference (VerticalReferenceValue)

Values indicating the reference level of the vertical extent.’;

(54)

in Section 19.4.2.5, the table is replaced by the following:

(55)

Section 19.5.2 is replaced by the following:

‘19.5.2.   Code Lists

19.5.2.1.   Potential Type (PotentialTypeValue)

Types of potential energy from renewable and waste resources.’;

(56)

Section 20.3.3 is replaced by the following:

‘20.3.3.   Code Lists

20.3.3.1.   Classification Method Used (ClassificationMethodUsedValue)

Codes indicating the means used to calculate the ore measurement.

20.3.3.2.   Commodity Code (CommodityCodeValue)

Values indicating the type of commodity.

20.3.3.3.   Enduse Potential (EndusePotentialValue)

Values indicating the end-use potential of the mineral.

20.3.3.4.   Exploration Activity Type (ExplorationActivityTypeValue)

Types of exploration activity carried out.

20.3.3.5.   Exploration Result (ExplorationResultValue)

Values indicating the result of the exploration activity.

20.3.3.6.   Importance (ImportanceValue)

Values indicating the importance of the commodity for the Earth Resource.

20.3.3.7.   Mine Status (MineStatusValue)

Values indicating the operational status of the mine.

20.3.3.8.   Mineral Deposit Group (MineralDepositGroupValue)

Values indicating the grouping of mineral deposits on the basis of their generic characteristics.

20.3.3.9.   Mineral Deposit Type (MineralDepositTypeValue)

Values indicating the style of mineral occurrence or deposit.

20.3.3.10.   Mineral Occurrence Type (MineralOccurrenceTypeValue)

The type of mineral occurrence.

20.3.3.11.   Mining Activity Type (MiningActivityTypeValue)

The type of mining activity, processing activity, or production.

20.3.3.12.   Processing Activity Type (ProcessingActivityTypeValue)

Values indicating the type of processing carried out during a mining activity.

20.3.3.13.   Reserve Category (ReserveCategoryValue)

The level of confidence of the estimate of the reserve.

20.3.3.14.   Resource Category (ResourceCategoryValue)

Indication whether the resource is measured, indicated or inferred.’