EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 02015R0776-20150519

Consolidated text: Commission Implementing Regulation (EU) 2015/776 of 18 May 2015 extending the definitive anti-dumping duty imposed by Council Regulation (EU) No 502/2013 on imports of bicycles originating in the People's Republic of China to imports of bicycles consigned from Cambodia, Pakistan and the Philippines, whether declared as originating in Cambodia, Pakistan and the Philippines or not

ELI: http://data.europa.eu/eli/reg_impl/2015/776/2015-05-19

02015R0776 — EN — 19.05.2015 — 000.001


This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

►B

COMMISSION IMPLEMENTING REGULATION (EU) 2015/776

of 18 May 2015

extending the definitive anti-dumping duty imposed by Council Regulation (EU) No 502/2013 on imports of bicycles originating in the People's Republic of China to imports of bicycles consigned from Cambodia, Pakistan and the Philippines, whether declared as originating in Cambodia, Pakistan and the Philippines or not

(OJ L 122 19.5.2015, p. 4)


Corrected by:

►C1

Corrigendum, OJ L 160, 22.6.2017, p.  37 (2015/776)




▼B

COMMISSION IMPLEMENTING REGULATION (EU) 2015/776

of 18 May 2015

extending the definitive anti-dumping duty imposed by Council Regulation (EU) No 502/2013 on imports of bicycles originating in the People's Republic of China to imports of bicycles consigned from Cambodia, Pakistan and the Philippines, whether declared as originating in Cambodia, Pakistan and the Philippines or not



Article 1

1.  The definitive anti-dumping duty applicable to ‘all other companies’ imposed by Article 1(2) of Regulation (EU) No 502/2013 on imports of bicycles and other cycles (including delivery tricycles, but excluding unicycles), not motorised, originating in the People's Republic of China, is hereby extended to imports of bicycles and other cycles (including delivery tricycles, but excluding unicycles), not motorised, consigned from Cambodia, Pakistan and the Philippines whether declared as originating in Cambodia, Pakistan and the Philippines or not, currently falling within CN codes ex 8712 00 30 and ex 8712 00 70 (TARIC codes 8712003020 and 8712007092 ) ►C1  with the exception of those produced by the companies listed below:



Country

Company

TARIC additional code

Cambodia

A and J (Cambodia) Co., Ltd, Special Economic Zone Tai Seng Bavet, Sangkar Bavet, Krong Baver, Ket Svay Rieng, Cambodia

C035

Smart Tech (Cambodia) Co., Ltd, Tai Seng Bavet Special Economic Zone, National Road No 1, Bavet City, Svay Rieng, Cambodia

C036

Speedtech Industrial Co., Ltd, Manhattan (Svay Rieng) Special Economic Zone, National Road No 1, Sangkat Bavet, Krong Bavet, Svay Rieng Province, Cambodia

C037

Bestway Industrial Co., Ltd, Manhattan (Svay Rieng) Special Economic Zone, National Road No 1, Sangkat Bavet, Krong Bavet, Svay Rieng Province, Cambodia

C037

The Philippines

Procycle Industrial Inc., Hong Chang Compound, Brgy. Lantic, Carmona, Cavite, the Philippines

C038  ◄

2.  The application of exemptions granted to the companies specifically mentioned in paragraph 1 of this Article or authorised by the Commission in accordance with Article 2(2) of this Regulation shall be conditional upon presentation to the customs authorities of the Member States of a valid commercial invoice, which shall conform to the requirements set out in the Annex to this Regulation. If no such invoice is presented, the anti-dumping duty as imposed by paragraph 1 of this Article shall apply.

3.  The duty extended by paragraph 1 of this Article shall be collected on imports consigned from Cambodia, Pakistan and the Philippines, whether declared as originating in Cambodia, Pakistan and the Philippines or not, registered in accordance with Article 2 of Regulation (EU) No 938/2014 and Articles 13(3) and 14(5) of Regulation (EC) No 1225/2009 with the exception of those produced by the companies listed in paragraph 1.

4.  Unless otherwise specified, the provisions in force concerning customs duties shall apply.

Article 2

1.  Requests for exemption from the duty extended by Article 1 shall be made in writing in one of the official languages of the European Union and must be signed by a person authorised to represent the entity requesting the exemption. The request must be sent to the following address:

European Commission

Directorate-General for Trade

Directorate H

Office: CHAR 04/039

1049 Brussels

Belgium

2.  In accordance with Article 13(4) of Regulation (EC) No 1225/2009 the Commission, may authorise, by decision, the exemption of imports from companies which do not circumvent the anti-dumping measures imposed by Regulation (EU) No 502/2013, from the duty extended by Article 1 of this Regulation.

Article 3

Customs authorities are hereby directed to discontinue the registration of imports, established in accordance with Article 2 of Regulation (EU) No 938/2014.

Article 4

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.




ANNEX

A declaration signed by an official of the entity issuing the commercial invoice, in the following format, must appear on the valid commercial invoice referred to in Article 1(2):

(1) the name and function of the official of the entity issuing the commercial invoice;

(2) the following declaration: ‘I, the undersigned, certify that the (volume) of (product concerned) sold for export to the European Union covered by this invoice was manufactured by (company name and address) (TARIC additional code) in (country concerned). I declare that the information provided in this invoice is complete and correct’;

(3) date and signature.

Top