Back to EUR-Lex homepage

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search
You are here

Document 02019R0804-20220925

Consolidated text: Commission Implementing Regulation (EU) 2019/804 of 17 May 2019 concerning the renewal of the authorisation of organic form of selenium produced by Saccharomyces cerevisiae CNCM I-3060 and of selenomethionine produced by Saccharomyces cerevisiae NCYC R397 as feed additives for all animal species and repealing Regulations (EC) No 1750/2006 and (EC) No 634/2007 (Text with EEA relevance)Text with EEA relevance

Access initial legal act
(

Legal status of the document In force

)

ELI: http://data.europa.eu/eli/reg_impl/2019/804/2022-09-25

02019R0804 — EN — 25.09.2022 — 001.001

This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

►B

COMMISSION IMPLEMENTING REGULATION (EU) 2019/804

of 17 May 2019

concerning the renewal of the authorisation of organic form of selenium produced by Saccharomyces cerevisiae CNCM I-3060 and of selenomethionine produced by Saccharomyces cerevisiae NCYC R397 as feed additives for all animal species and repealing Regulations (EC) No 1750/2006 and (EC) No 634/2007

(Text with EEA relevance)

(OJ L 132 20.5.2019, p. 28)

Amended by:

 

 

Official Journal

  No

page

date

►M1

COMMISSION IMPLEMENTING REGULATION (EU) 2022/1459 of 2 September 2022

  L 229

22

5.9.2022



▼B

COMMISSION IMPLEMENTING REGULATION (EU) 2019/804

of 17 May 2019

concerning the renewal of the authorisation of organic form of selenium produced by Saccharomyces cerevisiae CNCM I-3060 and of selenomethionine produced by Saccharomyces cerevisiae NCYC R397 as feed additives for all animal species and repealing Regulations (EC) No 1750/2006 and (EC) No 634/2007

(Text with EEA relevance)



Article 1

The authorisation of the additives specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’, is renewed subject to the conditions laid down in that Annex.

Article 2

1.  
The organic form of selenium produced by Saccharomyces cerevisiae CNCM I-3060, selenomethionine produced by Saccharomyces cerevisiae NCYC R397 and premixtures containing these substances, which are produced and labelled before 9 December 2019 in accordance with the rules applicable before 9 June 2019 may continue to be placed on the market and used until the existing stocks are exhausted.
2.  
Feed materials and compound feed containing the substances referred to in point 1, which are produced and labelled before 9 June 2020 in accordance with the rules applicable before 9 June 2019 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3.  
Feed materials and compound feed containing the substances referred to in point 1, which are produced and labelled before 9 June 2021 in accordance with the rules applicable before 9 June 2019 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3

Regulations (EC) No 1750/2006 and (EC) No 634/2007 are repealed.

Article 4

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.



ANNEX



Identification number of the additive

Name of the holder of authorisation

Additive

Composition, chemical formula, description, analytical method.

Species or category of animal

Maximum age

Minimum content

Maximum content

Other provisions

End of period of authorisation

Selenium in mg/kg of complete feed with a moisture content of 12 %

Category of nutritional additives. Functional group: compounds of trace elements

▼M1

3b810

—

Selenised yeast Saccharomyces cerevisiae CNCM I-3060, inactivated

Additive composition

Preparation of organic selenium:

Content of selenium: 2 000 to 2 400 mg Se/kg

Organic selenium > 97 to 99 % of total selenium

Selenomethionine > 63 % of total selenium

All species

—

 

0,50 (total)

1.  The additive shall be incorporated into feed in the form of a premixture.

2.  The directions for use of the additive and premixtures shall indicate the storage and stability conditions.

3.  For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment.

4.  Maximum supplementation with organic selenium:

0,2 mg Se/kg of complete feed with a moisture content of 12 %.

9 June 2029

Characterisation of the active substance

Selenomethionine produced by Saccharomyces cerevisiae CNCM I-3060

Chemical formula: C5H11NO2Se

Analytical method (1):

For the determination of selenomethionine in the feed additive:

— reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or

— high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion.

For the determination of total selenium in the feed additive:

— inductively coupled plasma atomic emission spectrometry (ICP-AES) or

— inductively coupled plasma mass spectrometry (ICPMS).

For the determination of total selenium in premixtures, compound feed and feed materials:

— hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).

3b810i

—

Selenised yeast Saccharomyces cerevisiae CNCM I-3060, inactivated

Additive composition

Preparation of organic selenium:

Content of selenium 3 000 -3 500 mg Se/kg

Organic selenium > 97 to 99 % of total selenium

Selenomethionine > 63 % of total selenium

All species

—

 

0,50 (total)

1.  The additive shall be incorporated into feed in the form of a premixture.

2.  The directions for use of the additive and premixtures shall indicate the storage and stability conditions.

3.  For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection.

4.  Maximum supplementation with organic selenium:

0,2 mg Se/kg of complete feed with a moisture content of 12 %.

5.  The dusting potential of the additive shall ensure a maximal Se exposure of 0,2 mg Se/m3

9 June 2029

Characterisation of the active substance

Selenomethionine produced by Saccharomyces cerevisiae CNCM I-3060

Chemical formula: C5H11NO2Se

Analytical method (1)

For the determination of selenomethionine in the feed additive:

— reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or

— high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion.

For the determination of total selenium in the feed additive:

— inductively coupled plasma atomic emission spectrometry (ICP-AES) or

— inductively coupled plasma mass spectrometry (ICPMS).

For the determination of total selenium in premixtures, compound feed and feed materials:

— hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).

▼B

3b811

—

Selenised yeast Saccharomyces cerevisiae NCYC R397, inactivated

Additive composition

Preparation of organic selenium:

Content of selenium: 2 000 to 3 500  mg Se/kg

Organic selenium > 98 % of total selenium

Selenomethionine > 63 % of total selenium

Characterisation of the active substance

Selenomethionine produced by Saccharomyces cerevisiae NCYC R397

Chemical formula: C5H11NO2Se

Analytical method (1)

For the determination of selenomethionine in the feed additive:

— reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV) or

— high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS) after triple proteolytic digestion.

For the determination of total selenium in the feed additive:

— inductively coupled plasma atomic emission spectrometry (ICP-AES) or

— inductively coupled plasma mass spectrometry (ICPMS).

For the determination of total selenium in premixtures, compound feed and feed materials:

— hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (EN 16159:2012).

All species

—

 

0,50 (total)

1.  The additive shall be incorporated into feed in the form of a premixture.

2.  For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal, mucosae or eye contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

3.  In the directions for use of the additive and premixtures, indicate the storage and stability conditions.

4.  Maximum supplementation with organic selenium:

0,20 mg Se/kg of complete feed with a moisture content of 12 %.

9 June 2029
(1)   

Details of the analytical methods are available at the following address of the European Union Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en
Top